Boost's Performance Attempt
#553
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
GP buddy Frankie and Ed Morad both suggested checking the pcv. I did.. looked normal. And THEN... I notice some melted blob of plastic below it. Hmmmm it'* loose and won't come out the top... there'* a few small pieces in there.
Fished them out. Hard plastic. Looks to have melted. Will be calling Ed tomorrow to bring him up to speed.
Thinking maybe this moved and it'* HOPEFULLY causing the issue.
Fished them out. Hard plastic. Looks to have melted. Will be calling Ed tomorrow to bring him up to speed.
Thinking maybe this moved and it'* HOPEFULLY causing the issue.
#555
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
Doesn't appear to be the issue or at least the piece in there might still be causing something. I have a possible leak under the snout to SC. Going to have another gasket in place soon.
Currently have bumped the octane up. We'll see it that helps at all.
Currently have bumped the octane up. We'll see it that helps at all.
#556
Senior Member
Posts like a Corvette
Join Date: Jan 2004
Location: Montréal, QC
Posts: 1,374
Likes: 0
Received 0 Likes
on
0 Posts
If the engine is misfiring then you can scan for that and identify which cylinder is the culprit. You can also pull the plugs and look for any signs of lean or rich cylinders.
If you have a vacuum leak then it will show up in your IAC count at idle or low rpms.
Are any of the injector skew values over 100?
Cheers,
If you have a vacuum leak then it will show up in your IAC count at idle or low rpms.
Are any of the injector skew values over 100?
Cheers,
#558
Senior Member
True Car Nut
Join Date: Feb 2005
Location: Brampton, Ontario
Posts: 3,014
Likes: 0
Received 0 Likes
on
0 Posts
I'm trying to follow this thread but you're getting to technical for me Boosty, where'* technical Ted when I need him. Oh well, off I go since Now I better go see what posts you've made about me.
#559
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
Ensured the charger gasket is 100% sealed to the intake tonight. Still getting the false kr at low rpm low throttle.
Have about 95-97 octane at the moment...
Looking for loose rattling items and finding none. Still looking though
Have about 95-97 octane at the moment...
Looking for loose rattling items and finding none. Still looking though