Matt's SSEi IS DONE!!!! :)
#41
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
3M gasket removing pad, use them all the time at work
Them are great, Emry cloth works excellent too, and i would much rather clean it up by hand..Bill W, i won't use the vulcan then, degreaser it is..degreaser won't pit or damage the aluminum surfaces will it?
Them are great, Emry cloth works excellent too, and i would much rather clean it up by hand..Bill W, i won't use the vulcan then, degreaser it is..degreaser won't pit or damage the aluminum surfaces will it?
#43
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
sounds like a project for tomorrow, ZZP parts came intoday, i popped on the new coupler, sure fits alot tighter than the old one hehehe, poured more oil on, called it a night..
Pics to come in this post later..
Pics to come in this post later..
#44
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
I didnt take a pic of it installed..for some reason..haha?
#47
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
was not hard to do, bit finiky seperating the rotor plate from the nose drive, other than that, easy stuff.
Paul: I have four months to do this, heheh, ive got all the time i need!
Paul: I have four months to do this, heheh, ive got all the time i need!
#49
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
bought the die grinder and bit set tonight.
I called a few places today on getting my EM welded up, they alll said, well, it will crack again right next to the weld, or blow out again garunteed..the one guy said TIG welding would be stronger especially if it was taced..but still would probably blow out.
**** sakes, i just want take it it, have it welded up shut, call it good lol
I called a few places today on getting my EM welded up, they alll said, well, it will crack again right next to the weld, or blow out again garunteed..the one guy said TIG welding would be stronger especially if it was taced..but still would probably blow out.
**** sakes, i just want take it it, have it welded up shut, call it good lol
#50
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
i got one em ported tonight with the new die grinder..now all i need to do is find something to polish the hell out of it with.
LIM is soaking in Orange degreaser now.
Looking into my LIM, i notices a few ports are quite deep in...my bit is a decent size, but probably will not go in that far..what did everyone else do?
LIM is soaking in Orange degreaser now.
Looking into my LIM, i notices a few ports are quite deep in...my bit is a decent size, but probably will not go in that far..what did everyone else do?