ZillaMotorsports strikes again. Jr3800 Update Page 5
Senior Member
True Car Nut
Joined: Dec 2002
Posts: 5,459
Likes: 2
From: Sauk Centre, MN
WOW!!! 
That'* is very impressive.... You need to get a real CAI or FWI on there and really get going. I know it'* just an L36, but that stock air box (gutted or not) with a K&N drop in is just too restrictive, considering what else you've done to the car.
Next mods:
FWI
L26 aluminum UIM
L26 to L36 TB adapter
1.9 rockers
LS6 valve springs
OR PR'*
ZZP UD WP pulley (currently sitting here in my garage)
Followed by Don making the first 14 second run at a track in a NA 3800 powered Bonneville, here on BC.
That'* is very impressive.... You need to get a real CAI or FWI on there and really get going. I know it'* just an L36, but that stock air box (gutted or not) with a K&N drop in is just too restrictive, considering what else you've done to the car.Next mods:
FWI
L26 aluminum UIM
L26 to L36 TB adapter
1.9 rockers
LS6 valve springs
OR PR'*
ZZP UD WP pulley (currently sitting here in my garage)
Followed by Don making the first 14 second run at a track in a NA 3800 powered Bonneville, here on BC.
Guest
Posts: n/a
Originally Posted by SSEimatt93
Don! That car moves man! Nice to see an NA with that much get up and go, she really Breaks the tires loose like nothing!
I am impressed
I am impressed
The Mods are simple.. We enabled the engine to breathe... It can inhale and exhale.. And there isn't a restriction in the middle... Amazing for a car on the stock EPROM/PCM with 19* timing at WOT... I have heard the GP'* are at 23-24*..
Still on the stock rockers.. I did replace the Lifters while I was in there, I had a light tick and the lifter had to go for that reason.. I used the Comp Cam OE lifters... I don't plan on spinning past 6k anyhow.. Still on the stock springs... Original timing chain...
PEM'*, Stock downpipe, Magnaflow High flow cat, stock piping, stock res and still stock muffy..
Gutted air box, with K&N... Shaved TB Shaft...
So what have we really done? In a nutshell, we gave the car a new set of lungs
Thanks for the Props Matt
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
TJ, no offense, bud, but you'll be hard pressed to beat an L36 with a port-matched LIM with what you have in your sig. You'll have to have ideal track conditions. All things being equal, you've got some work to do. And you know what it is. To get the most out of your HV, you need to do the LIM. To get the most out of rockers, you need to do the LIM. The L36'* weak spot is that LIM.
Guest
Posts: n/a
Originally Posted by OLBlueEyesBonne
WOW!!! That'* is very impressive.... You need to get a real CAI or FWI on there and really get going. I know it'* just an L36, but that stock air box (gutted or not) with a K&N drop in is just too restrictive, considering what else you've done to the car.
Next mods:
FWI
L26 aluminum UIM
L26 to L36 TB adapter
1.9 rockers
LS6 valve springs
OR PR'*
ZZP UD WP pulley (currently sitting here in my garage)
Followed by Don making the first 14 second run at a track in a NA 3800 powered Bonneville, here on BC.
That'* is very impressive.... You need to get a real CAI or FWI on there and really get going. I know it'* just an L36, but that stock air box (gutted or not) with a K&N drop in is just too restrictive, considering what else you've done to the car.Next mods:
FWI
L26 aluminum UIM
L26 to L36 TB adapter
1.9 rockers
LS6 valve springs
OR PR'*
ZZP UD WP pulley (currently sitting here in my garage)
Followed by Don making the first 14 second run at a track in a NA 3800 powered Bonneville, here on BC.
But a Cam has crossed my mind lately
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Senior Member
Certified GM nut
Joined: Dec 2002
Posts: 2,037
Likes: 0
From: plattsburgh NY
yea i may have some work ahead of me. I want to get the injectors out of the way, how i can get a gain out of this powerlog. Then federal tax return comes in about 5 more weeks, and i am doing LIM, gaskets, and HV3.
Senior Member
True Car Nut
Joined: Dec 2005
Posts: 4,064
Likes: 0
From: August 07 COTM....NEBF '06, CEBF '06 OHMM '06 ONBF '07 CEBF '07
Very impressive, Don.
Now I know what I'm doing soon. I still would love to meet up with you and compare the cars....
Again, very impressive.
Now I know what I'm doing soon. I still would love to meet up with you and compare the cars....
Again, very impressive.
Senior Member
True Car Nut
Joined: Feb 2003
Posts: 4,508
Likes: 2
From: Philly
Originally Posted by willwren
TJ, no offense, bud, but you'll be hard pressed to beat an L36 with a port-matched LIM with what you have in your sig. You'll have to have ideal track conditions. All things being equal, you've got some work to do. And you know what it is. To get the most out of your HV, you need to do the LIM. To get the most out of rockers, you need to do the LIM. The L36'* weak spot is that LIM.
I doubt he'd be 'hard pressed'.
Senior Member
True Car Nut
Joined: Aug 2004
Posts: 3,067
Likes: 1
From: In your garage, swipin' da lug nutz
Oh man....I can't wait to get over there and lay down some Goodyear snot.
I drove it *during* it'* learning curve, and it had a very fat 2nd gear pulling ability. Those runs are very impressive indeed. But beware...those that seek absolute power...end up fragging their trans And Don, I believe yours a bit on the moooooshy side.
I drove it *during* it'* learning curve, and it had a very fat 2nd gear pulling ability. Those runs are very impressive indeed. But beware...those that seek absolute power...end up fragging their trans
And Don, I believe yours a bit on the moooooshy side.
