What did you do with your car/truck or shop today? V3.0
#431
Senior Member
Certified GM nut
Certified GM nut
ha. on a side note, cars are cheep there!!! or is it 2500 down on that badboy?
car is currently parked parallel. and my back hurts too much from working to push er. so ill be messing with it probably on thursday when im off. right side axle btw.
accidentally started it in park to get it off the rollback, and for just that brief second it was in reverse it was enough to turn the rear view mirror down and knock my cb mic off its mount. wont be trying that again!!!!
car is currently parked parallel. and my back hurts too much from working to push er. so ill be messing with it probably on thursday when im off. right side axle btw.
accidentally started it in park to get it off the rollback, and for just that brief second it was in reverse it was enough to turn the rear view mirror down and knock my cb mic off its mount. wont be trying that again!!!!
#432
Senior Member
Certified GM nut
Certified GM nut
well, i got impatient. the neighbors were out and i yelled over to em to push me while i steered
ive never done an axle before, but i dont think its supposed to look like this. the rings were still on the boot, but i couldnt find the 3rd bearing. is there supposed to be one?
67e96d98-11b7-4124-b299-2d5b73ff2ab5_zps7a6c374c.jpg
ive never done an axle before, but i dont think its supposed to look like this. the rings were still on the boot, but i couldnt find the 3rd bearing. is there supposed to be one?
67e96d98-11b7-4124-b299-2d5b73ff2ab5_zps7a6c374c.jpg
#433
Senior Member
True Car Nut
they should all look the same i would think and be pretty tight in there. i think it has some miles on it anyway, metal looks pretty thin on the top too
#434
Artist
True Car Nut
Ordering new belts (serpentine and water pump) and a water pump drive pulley. New pulley is because I had to remove the pulley when doing the valve cover gaskets, and in the process of removing my first pulley I started to do it wrong and ever so slightly bent it as it'* plastic. Helps when you know the right tool for the job
#436
Senior Member
True Car Nut
finally got my car back, rental really makes you appreciate a good car. car seems really tight and solid like my 03 monte now with the strut bars and kyb struts, hard to believe how much difference those things make. now i just have to put all the speakers and things back in it that i took out so the shop wouldnt be tempted to "loose"
#437
Senior Member
Posts like a Corvette
A proper detail for the new year. It was getting dusty sitting in the garage. Next year I need car cover for it. I can't wait to drive it on nice sunny days. It'* a weekend car/sunday driver. It should be nice.
20140423_160608_RichtoneHDR_zps90e9395c.jpg
20140423_160626_RichtoneHDR_zps70e69b63.jpg
20140423_160640_RichtoneHDR_zpse4358019.jpg
20140423_160659_RichtoneHDR_zps783bf735.jpg
20140423_195334_RichtoneHDR_zpsa4d06d3f.jpg
20140423_160608_RichtoneHDR_zps90e9395c.jpg
20140423_160626_RichtoneHDR_zps70e69b63.jpg
20140423_160640_RichtoneHDR_zpse4358019.jpg
20140423_160659_RichtoneHDR_zps783bf735.jpg
20140423_195334_RichtoneHDR_zpsa4d06d3f.jpg
#438
Senior Member
Certified GM nut
Washed and waxed tuesday. I replaced to front rotors, pads, and calipers with dual piston ones from an Impala Monday. My drivers' side caliper started sticking, so I figured it was just as well upgrade.
#439
Senior Member
Wow between Nate & Travis I'm not sure which red car is more polished..nice work to both of you...now come over here & please do my dirty non waxed Pk Ave! It is in critical need!
I am going to need a clay bar & start from scratch. This wont happen soon as the weather has been very stormy/rain every week still. I need some dry days to get er done!
I am going to need a clay bar & start from scratch. This wont happen soon as the weather has been very stormy/rain every week still. I need some dry days to get er done!
__________________
1997 Buick Pk Ave (Soft Ride) Suspension!
1997 Buick Pk Ave (Soft Ride) Suspension!