What did you do with your car/truck or shop today? V2.0
Senior Member
Certified GM nut
Joined: Jan 2011
Posts: 2,112
Likes: 19
From: Newfoundland, Canada
IMAG2865_zps6591ab47.jpg
Put some new fogs in the car last week. I do a lot of highway driving at night. These seem to help fill some dull areas.
Put some new fogs in the car last week. I do a lot of highway driving at night. These seem to help fill some dull areas.
Senior Member
True Car Nut
Joined: Dec 2009
Posts: 9,616
Likes: 594
From: western,ny state
i got a new 3.5" drive shaft finally and then the trans went on my firebird, errrr. the trans tally is 2 700r4'*, one stock th-400 and 2 race built th-400'*. i hate friggin autos
yesterday tore down a atv club members wolverine to see why it was smoking. yamahas seem pretty easy to work on. its my first
yesterday tore down a atv club members wolverine to see why it was smoking. yamahas seem pretty easy to work on. its my first
Senior Member
True Car Nut
Joined: Jan 2011
Posts: 3,344
Likes: 0
From: Michigan
Got a lovely power steering leak, squealing wheel bearings (possible U joint), and exhaust manifold leak.
so basically once the first two are fixed within the next two weeks im going to be getting some shiny new headers and officially done "playing" with it and entering it in shows to possibly help pay off some things.
so basically once the first two are fixed within the next two weeks im going to be getting some shiny new headers and officially done "playing" with it and entering it in shows to possibly help pay off some things.
Thread Starter
BANNED
True Car Nut
Joined: Oct 2009
Posts: 5,989
Likes: 4
From: Usa
Did a brake job (pads/rotors) on a 06 Accord. Also put a new CV axel on the passenger side and changed the PS pump pulley.
Then I got to work on another flood vehicle. 2010 Tundra that will crank, but not fire. It'* getting fuel but no spark. Took out the ECU and took it to the dealer to make sure it was working right and that it hadn't lost the security setup. Also pulled the plugs and coil packs. Replaced the plugs and ohmed the coils, coils are good. We'll see where we are when we get the ECU back.
Then I got to work on another flood vehicle. 2010 Tundra that will crank, but not fire. It'* getting fuel but no spark. Took out the ECU and took it to the dealer to make sure it was working right and that it hadn't lost the security setup. Also pulled the plugs and coil packs. Replaced the plugs and ohmed the coils, coils are good. We'll see where we are when we get the ECU back.
Senior Member
Posts like a Camaro
Joined: Jan 2010
Posts: 853
Likes: 32
From: Elmira, New York
Checked the blazer out and found that the frame is rotted real bad. So took it back and got the 2 door one which seems better not as rusty. Tomorrow i will be checking it out better at work.
