!990 Buick Lesabre Wont Use Full RPM Range

Reply Subscribe

Thread Tools

Search this Thread

Sep 20, 2015 | 05:24 PM

#11

Forzoma

Thread Starter

Junior Member

Joined: Sep 2015

Posts: 9

Likes: 0

From: Illinois

Quote:

Originally Posted by CDAJoe

did you pull the codes via the check engine light or did you use a scan tool? The Scan tool if it is the more advanced ones can give you info on what your sensors are seeing.

i used the check engine light, im currently saving for an obd1 scan tool.

Sep 20, 2015 | 05:26 PM

#12

Forzoma

Thread Starter

Junior Member

Joined: Sep 2015

Posts: 9

Likes: 0

From: Illinois

Quote:

Originally Posted by Tech II

If it won't run with the MAF connected, you probably need a MAF....I know you said you replaced it, but was it a used one or reman? Those reman'* can be bad right out of the box.....

I believe it was a duralast from Auto Zone but i think your right i may need a new one aswell as a CPS

Sep 20, 2015 | 05:34 PM

#13

Forzoma

Thread Starter

Junior Member

Joined: Sep 2015

Posts: 9

Likes: 0

From: Illinois

Quote:

Originally Posted by CDAJoe

did you pull the codes via the check engine light or did you use a scan tool? The Scan tool if it is the more advanced ones can give you info on what your sensors are seeing.

Can you recommend a good obd1 scan tool that doesn't rely on the check engine light method?

Sep 21, 2015 | 09:57 PM

#14

Tech II

Senior Member

True Car Nut

Joined: Feb 2014

Posts: 2,878

Likes: 1,097

From: Worcester, Ma.

What is your price range?

Do you want to read OBD I or OBD I&II codes?

Do you want just codes, or to read data? Just ECM/PCM codes or also ABS codes?

Do you want to graph wave forms?