Parts/Supplies for Tranny Swap
Thread Starter
Senior Member
True Car Nut
Joined: Jun 2004
Posts: 3,459
Likes: 1
From: Glendale, AZ
Originally Posted by BillBoost37
UIM/LIM to lift better...no way..use the stock engine hoist mounts. If you don't have some..I'll get you a pair on the double.
BANNED
Joined: Mar 2004
Posts: 0
Likes: 5
From: Purgatory
Originally Posted by big_news_1
Originally Posted by BillBoost37
UIM/LIM to lift better...no way..use the stock engine hoist mounts. If you don't have some..I'll get you a pair on the double.
DINOSAURUS BOOSTUS
Expert Gearhead
Joined: Mar 2005
Posts: 41,391
Likes: 30
From: Enfield, CT
Andrew...send away. I've only got the set for my motor at this moment. I suggested Bob and Ben run to a JY and grab a couple front ones from 3800'*. Front/back are the same.
Senior Member
True Car Nut
Joined: Aug 2004
Posts: 3,067
Likes: 1
From: In your garage, swipin' da lug nutz
When I did my front trans mount, I found that the Autozone replacement was not quite right...Don and I had a helluva time lining up all the bolt holes, only to find that one of the holes was not drilled right 
Since the old one was trash, and I wanted to get the thing home, and since I knew the trans was gonna come back out probably, I left it with 3 bolts instead of four. But the rear dogbone mount fit just fine.
Since the old one was trash, and I wanted to get the thing home, and since I knew the trans was gonna come back out probably, I left it with 3 bolts instead of four. But the rear dogbone mount fit just fine.
Senior Member
True Car Nut
Joined: May 2005
Posts: 3,448
Likes: 7
From: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Don't worry about bolts. We should have plenty left over when we are all done anyways
No really, I am sure between myself and a couple of the grand prix guys, we will have more than we need to choose from.
Thanks Andrew. I was willing to take my front hoist mount off of my car, and see if I could find another or scrounge the yards for some, but this will make things even easier.
No really, I am sure between myself and a couple of the grand prix guys, we will have more than we need to choose from.
Thanks Andrew. I was willing to take my front hoist mount off of my car, and see if I could find another or scrounge the yards for some, but this will make things even easier.
Member
Posts like a V-Tak
Joined: Jul 2005
Posts: 99
Likes: 0
From: Chandler AZ
Hey Ben,
Thomas here and I was wondering if you have already picked up the rear main seal? If not I can get it for you, you just need to let me know. I get GMS price on parts so althou- its not much, every little bit counts.
I also have a set of those motor lift brackets for lifting the engine out, let me know about that.
Bob and I will be in touch so if your talking with him ,let him know, either way.....
If you want other stuff like GM bolts like those flywheel to TC bolts, LIM or UIM bolts etc, let me know.
Later,
Thomas here and I was wondering if you have already picked up the rear main seal? If not I can get it for you, you just need to let me know. I get GMS price on parts so althou- its not much, every little bit counts.
I also have a set of those motor lift brackets for lifting the engine out, let me know about that.
Bob and I will be in touch so if your talking with him ,let him know, either way.....
If you want other stuff like GM bolts like those flywheel to TC bolts, LIM or UIM bolts etc, let me know.
Later,