Guages Not working and its Not a corrosion problem......
Senior Member
Posts like a Camaro
Joined: Sep 2003
Posts: 1,025
Likes: 6
From: Bad Axe,MI.
Originally Posted by willwren
I've fixed intermittent corrosion problems on 2 bonnevilles at that connector. It'* a good place to start (my 93 was like this when I bought it, and is fine to this day now)..
Junior Member
Posts like a V-Tak
Joined: Feb 2003
Posts: 29
Likes: 0
From: Muskogee, Ok
My Guages Quit Also
My guages quit also. Gas,oil and boost quage, DIC, compass also A/C and HUD and radio.
The only things that do work are the speedo, tach and idiot lamps at start up.
This car is an electrical nightmare
The only things that do work are the speedo, tach and idiot lamps at start up.
This car is an electrical nightmare
Junior Member
Posts like a V-Tak
Joined: Feb 2003
Posts: 29
Likes: 0
From: Muskogee, Ok
Replaced battery cables
:( Will I replaced the positive battery cables today, hoping that was the cause of my dash problems. That did not help.
Still the only thing that works on the dash is the speedo, tach and idiot lamps on start up. My gas,oil,boost,DIC, HUD, A/C, radio,cig lighter in the dash still do not work.
It sounds like a ground problem to me. But I am stumped as to where to look. I even ran a seperate ground wire from the battery to the dash, but no luck.
Stumped in Oklahoma
Still the only thing that works on the dash is the speedo, tach and idiot lamps on start up. My gas,oil,boost,DIC, HUD, A/C, radio,cig lighter in the dash still do not work.
It sounds like a ground problem to me. But I am stumped as to where to look. I even ran a seperate ground wire from the battery to the dash, but no luck.
Stumped in Oklahoma
Senior Member
Posts like a Camaro
Joined: Sep 2003
Posts: 1,025
Likes: 6
From: Bad Axe,MI.
Senior Member
Posts like a Camaro
Joined: Jul 2004
Posts: 1,090
Likes: 0
From: Canada, Ontario
I just had the exact problem in my 95 ssei, check the main engine harness i guess over time the wires will break and melt, io took my car to the dealership and the had to rewire the entire wire harness as well replace the cam and crankshaft sensors and harnesses connecting these things, check the wires under and over the supecharger, i thought i had bad ground but everything was good, jsut a starting point for you
