95 ssei problems HELP!!!
#31
Senior Member
Certified GM nut
Join Date: Oct 2005
Location: Western New York
Posts: 1,942
Likes: 0
Received 0 Likes
on
0 Posts
Let'* cover the free stuff first. These are all good preventive maintenance items.
1 - Clean both ends of all battery cables. Remove all the bolts & rubber boots from the cables so you can find the corrosion. Clean them with a wire brush or sandpaper. Coat them with dielectric grease before reassembling.
2 - Clean the ground bus on both sides of the car. Remove the metal bar from the bus & clean both the male & female ends of the bus terminals. Coat the metal bar with dielectric grease before reassembling.
3 - Remove the coils, ICM & ICM mounting plate. Clean the top of the mounting bracket, both sides of the mounting plate and the bottom of the ICM. Coat all four surfaces with dielectric grease before reassembling.
4 – Make sure all the spark plug wires are going to the correct cylinder.
1 - Clean both ends of all battery cables. Remove all the bolts & rubber boots from the cables so you can find the corrosion. Clean them with a wire brush or sandpaper. Coat them with dielectric grease before reassembling.
2 - Clean the ground bus on both sides of the car. Remove the metal bar from the bus & clean both the male & female ends of the bus terminals. Coat the metal bar with dielectric grease before reassembling.
3 - Remove the coils, ICM & ICM mounting plate. Clean the top of the mounting bracket, both sides of the mounting plate and the bottom of the ICM. Coat all four surfaces with dielectric grease before reassembling.
4 – Make sure all the spark plug wires are going to the correct cylinder.
#32
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2007
Location: tampa fl
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
i think crank sensor too but still dont know why the scantool aint workin any way i can get the wiring diagram for the obd prot on the car i think someone might have changed it around it doesnt look like it matches wit the scantool
Thread
Thread Starter
Forum
Replies
Last Post
Hesk000
Everything Electrical & Electronic
9
12-15-2008 03:07 PM