When should i get a new PCM?
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2007
Location: Oregon
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
When should i get a new PCM?
Hey, i have plans on modding my bonneville and i was wondering when should i get a new PCM? should i get it right away? or should i wait to get certain mods then get one.
#2
well usually you just have it reflashed if your mods require it. what kind of mods are you talking about? if you don't have any and don't plan on spending a whole heck of alot of money right away, PCM reflashing probably is not needed right now. But before I judge too quickly, what are those mods?
#3
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
It makes more sence to get a pcm after you do mods. A pcm will unlock a little more power from intake and exhaust mods that you can't achieve on a stock tune.
#8
Rocker OR Cam, unless the rockers you're doing with a cam are the stock ratio (1.60) rollers.
The cam will increase valve lift as it is, and adding higher ratio rockers on top would be WAY too much. A cam will give you a broader power band but rockers are much easier to install.
The cam will increase valve lift as it is, and adding higher ratio rockers on top would be WAY too much. A cam will give you a broader power band but rockers are much easier to install.
Thread
Thread Starter
Forum
Replies
Last Post