Will the 96 Bonne pcm work with the 96 Regal wiring harness? I'm doing a swap and in my 96 grand prix...using the 96 regal 3.8 harness....but need to use the 96 Bonne pcm. Since they both are 3.8 motors, I'm hoping that all the pins will be the same.

I can send you the pin setup for the 96 PCM so you can reference it to the W-body PCM and harness setup.

That would be perfect!

I'll have them for you tomorrow. If they aren't interchangable, you could always use the harness off of my 96, as I can guarantee it will work with the PCM.

That would make sense that the 96 Bonne pcm would work with the 96 Bonne wiring harness . . . but I assumed that the Bonne wiring harness would not work in a Grand Prix since they are different bodies. I just assumed that though and I really don't know for sure, if the Bonne wiring harness works in a w-body than that would be sweet.

there may be different pin ins and outs between cars, along with differences in wiring harnesses. a 97 gtp has a different tranny connector than a 97 ssei.

96SSEi_tampa -

I sent you a pm about picking up the 96 Bonne pcm this weekend.

Other issue you may run into is gearing differences in the trannys.