Pulley Size
Thread Starter
Senior Member
Posts like a Turbo
Joined: Nov 2002
Posts: 421
Likes: 0
From: Greenville, SC
Pulley Size
I want to get a small pulley for my 95 ssei. What size should i get so i don't hurt the engine, yet get some performance gain. Everything is pretty much stock, gutted air box, and intake soon to come.
Senior Member
Posts like a Northstar
Joined: Dec 2002
Posts: 587
Likes: 0
From: Western, Mass
A 2.5" pulley would be a good size. It is the stock size for 92-93'* so it won't over rev the SC.
Check out www.pulleyboys.com they have a decent price and you can get them in silver or black. They look pretty much stock for the Series 1 SC.
Check out www.pulleyboys.com they have a decent price and you can get them in silver or black. They look pretty much stock for the Series 1 SC.
Junior Member
Joined: May 2002
Posts: 1
Likes: 0
94-95 I recomend a 2.5 pulley (what I have) but I have heard of a member here running a 2.4 successfully.
92-93 I belive they can run down to a 2.2 (2.0 if you want to really push it.
)..but don't quote me on those.
FYI: The stock pulley size on a 92-93 is smaller than the 94-95. Differences in ratios throughout the engine make up the difference. ( such as pulley sizes, etc...)
92-93 I belive they can run down to a 2.2 (2.0 if you want to really push it.
)..but don't quote me on those.FYI: The stock pulley size on a 92-93 is smaller than the 94-95. Differences in ratios throughout the engine make up the difference. ( such as pulley sizes, etc...)
Thread
Thread Starter
Forum
Replies
Last Post
Mark Peters
Performance, Brainstorming & Tuning
10
Mar 21, 2003 08:42 PM