Hey guys, I have a 96 ssei and im trying to put a lower temp t-stat and and make the fans come on at the lower temp also. but i talked to the guys over at intense-racing and they said they couldn't flash the PCM to do it. I was wondering if i could do that with an aftermarket programmer. Thanks.

You can do the manual hi-speed fan override like a few of us have done, or:

http://www.streetrodstuff.com/Products/1042/

https://www.casperselectronics.com/M...Category_Code=

https://www.casperselectronics.com/M...Category_Code=

Or make your own thermostatically controlled unit, or maybe check out a DHP power tuner.

If you just want a PCM DHP and/or ZZP will flash a PCM for you. Just E-mail/call them because it will not be on their website.

I thought that 96'* could not be done, which it why Intense can't do it?

Do the switch override, a lot cheaper, fans come on when YOU want them too, and less of a headache.

ZZP uses HP Tuners so I doubt they can do a 96 however, DHP I think has been known to do them in the past.