on the back bank the little hole in the lifter is faceing the water pump side and the front bank the holes faceing the TB side. im pretty sure thats how theres were i was just double checking

thanks

If you think about it, there'* no other way for them to go on.

yeah i guess so...thanks

well finally got it all back together the other day, and spun it over a few time to lube it up. then pluged icm back in and it started up and ran better than it has in a long time. ran it for about 3 mins then shut down to check fluid levels. they were all good so go to turn it over and nothing. dosent even seem to try, just a cliking sound. so i switched out with a new battery and it didnt fix it. so i cleaned the tremals and grounds, still didnt fix it. so i cleaned and checked connections on the starter, that didnt fix it eitheir. soleniod seems to be working just starter motor not turning or even trying to. so tomorrow ill pull the starter and have it rebuilt. unless you guys have any other suggestions ? and also do i need to remove the engine mount to remove the starter ?

thanks

I say pull the starter and have it tested before rebuilding. You can remove the starter without removing the engine mount.

okay, how do you test it ?

thanks

Places like autozone should be able to test it.

okay thanks lots