1995 Oldsmobile 88 obd 1.5 jumping port
#2
Senior Member
True Car Nut
You don't. '93 was the last year you could do that in these cars.
'95 uses the notorious GM OBD 1.5 system which requires a scanner capable of the protocol. In this iteration, it'* essentially an OBD 2 computer, using OBD 1 communication protocols, over an OBD 2 port. You will need to find a scanner that lists it is specifically compatible. I have an Actron CP9145 that does the job perfectly, but other scanners can do it as well.
'95 uses the notorious GM OBD 1.5 system which requires a scanner capable of the protocol. In this iteration, it'* essentially an OBD 2 computer, using OBD 1 communication protocols, over an OBD 2 port. You will need to find a scanner that lists it is specifically compatible. I have an Actron CP9145 that does the job perfectly, but other scanners can do it as well.
Thread
Thread Starter
Forum
Replies
Last Post
Drifter420
Everything Electrical & Electronic
6
12-30-2017 10:25 PM
dumbsioux
Everything Electrical & Electronic
7
11-29-2004 11:39 AM