DIC - Works / Does not work !!
#1
Junior Member
Thread Starter
Join Date: Nov 2006
Location: Alberta Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
DIC - Works / Does not work !!
I cleaned the connectors on ground bus and everything seemed fine for about 15 minutes when I again lost the image on DIC. Cleaning of the ground did help a bit so I now wonder if there might still be related to a grounding issue. A line from the grounding bus must terminate to the car body at some location. Where might the location (*) be found so I can check and/or clean as well.
Gordo
Gordo
#2
Senior Member
Certified GM nut
DIC
You will have to pull out the cluster and check the green harness wiring in the back for cracks in the wiring. Its common on these units.
Please continue with your original thread.
Please continue with your original thread.
Thread
Thread Starter
Forum
Replies
Last Post
00SLE
Everything Electrical & Electronic
7
04-13-2008 10:41 PM
caminated2k
Everything Electrical & Electronic
14
11-27-2005 02:53 AM