As you know, my Fiero has a 94/95 L67 in it, and I need to rewire up the OBD 1.5 connector so I can get my laptop connected for scantool purposes. I need someone to look in a 94 FSM and determine what color the proper wires are, and which plug it comes off of (IE the red, white or blue)

ummm its a ODB 2 connector

my ODB2 connector works just fine

Yeah I knew that.

Just felt like saying OBD 1.5.

Well, OBD 1.5 implies OBD 2 connector... so there.

Where'* Mos'* plane crashing in flames picture?

C'mon Ryan and John..let'* help out here.

Pinky.. I believe I've got Randy'* 95 FSM'* at my place still... that should work for you correct? I'll try and scan the page/pages tonight if no one has beaten me to it by then.

Since I haven't compared the 1.5 to 2.0, I'm unsure, however on my car when hooking up an aeroforce...it only takes 4 wires. Might be a quick easy wire up once you have a connector.

Well when i get home today i can take some pics of my FSM

And you won't post them. FSM'* are copyrighted material, that we do not allow to be posted. We are held to strict compliance due to our trademark and copyright agreement with Pontiac.

Ok, i sketch them

Bump to to the top. Also have more to add.

I need to know what connector and wire color the speedo one is for the speedo input from the PCM to the speedo.

Here is what I have to do -