Impala ls 2000 Stalls at high speed
01-19-2014, 10:39 AM
#41
Senior Member
Posts like a Supercharger
Thread Starter
just out of curiosity why do you have a zip tie on the vacuum boot there? if it looks dry rotted or anything that will give you issues in the future as well. the fuel pressure is regulated by that and the evap purge goes into there. you will have evap code and poor running if its hard and brittle
01-19-2014, 01:53 PM
#42
Retired
Certified Car Nut
It should be replaced, but good luck finding a direct replacement. I have the same issue on my 97. RTV, zip ties, whatever works good for me. It is possible to go to Autozone and you can Frankenstein some connectors together to make what you need.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
01-19-2014, 03:39 PM
#43
Senior Member
True Car Nut
you can get it from the dealer for less than 30 bucks but its listed as the lines that go to the fpr and purge valve. it comes with those and the boot. and if it came loose on its own you want to replace it because its not doing it job. vacuum tubes dont seal if they are hard and dry rot looking. you may want to look at the rest while you are in there
Thread
Thread Starter
Forum
Replies
Last Post
