Sub in rear deck?
Originally Posted by ForeverSilent004
whats the difference between a 6x9" woofer and a 6x9" coaxial? the tweeter
a woofer will go no lower than a coaxial. its a gimmick
a pair of 10" subs in the rear deck would be nice, and all you would need is 130W rms for each sub for them to reach maximum excursion. no cutting or boxes either. just make a baffel out of 3/4" MDF and mount it to the deck
check out elite car audio forum, they have the best IB threads out there
a woofer will go no lower than a coaxial. its a gimmick
a pair of 10" subs in the rear deck would be nice, and all you would need is 130W rms for each sub for them to reach maximum excursion. no cutting or boxes either. just make a baffel out of 3/4" MDF and mount it to the deck
check out elite car audio forum, they have the best IB threads out there
subs in the rear deck would need to be free air subs. They use the trunk as an enclosure basically.... A decent setup in a decent box will be fine though..
Subwoofer Specifications
* Size: 10 inch
* Rec. Sealed Box Dims: 0.75 cu.ft.
* Rec. Ported Box Dims: 1.50 cu.ft.
* Free Air Usage: yes
* Sensitivity: 91.1 dB
* Frequency Response: 35-150 Hz
* Recommended RMS Power: 200W
* Peak Power Handling: 400W
* Impedance: 4 ohms subwoofer wiring options
* Size: 10 inch
* Rec. Sealed Box Dims: 0.75 cu.ft.
* Rec. Ported Box Dims: 1.50 cu.ft.
* Free Air Usage: yes
* Sensitivity: 91.1 dB
* Frequency Response: 35-150 Hz
* Recommended RMS Power: 200W
* Peak Power Handling: 400W
* Impedance: 4 ohms subwoofer wiring options
Originally Posted by corvettecrazy
Subwoofer Specifications
* Size: 10 inch
* Rec. Sealed Box Dims: 0.75 cu.ft.
* Rec. Ported Box Dims: 1.50 cu.ft.
* Free Air Usage: yes
* Sensitivity: 91.1 dB
* Frequency Response: 35-150 Hz
* Recommended RMS Power: 200W
* Peak Power Handling: 400W
* Impedance: 4 ohms subwoofer wiring options
* Size: 10 inch
* Rec. Sealed Box Dims: 0.75 cu.ft.
* Rec. Ported Box Dims: 1.50 cu.ft.
* Free Air Usage: yes
* Sensitivity: 91.1 dB
* Frequency Response: 35-150 Hz
* Recommended RMS Power: 200W
* Peak Power Handling: 400W
* Impedance: 4 ohms subwoofer wiring options
if you are looking for cheap half way decent bass those will work...but if you want really high quality music along the whole low frequency range then I would reccomend something better.
Originally Posted by corvettecrazy
Subwoofer Specifications
* Size: 10 inch
* Rec. Sealed Box Dims: 0.75 cu.ft.
* Rec. Ported Box Dims: 1.50 cu.ft.
* Free Air Usage: yes
* Sensitivity: 91.1 dB
* Frequency Response: 35-150 Hz
* Recommended RMS Power: 200W
* Peak Power Handling: 400W
* Impedance: 4 ohms subwoofer wiring options
* Size: 10 inch
* Rec. Sealed Box Dims: 0.75 cu.ft.
* Rec. Ported Box Dims: 1.50 cu.ft.
* Free Air Usage: yes
* Sensitivity: 91.1 dB
* Frequency Response: 35-150 Hz
* Recommended RMS Power: 200W
* Peak Power Handling: 400W
* Impedance: 4 ohms subwoofer wiring options
Thread
Thread Starter
Forum
Replies
Last Post
Pologuy
Audio (and aftermarket electronics)
25
Jul 31, 2009 09:44 PM




