im sorry but your the only guys that i know to ask

has anyone ever used the factory tweeter with an aftermarket 5 1/4"? and how did you wire it?

thanks

umm, you should have 2 sets of wires in the door...one for the 5.25 and one for the tweeter.....there is NO NEED to tap into the 5.25 wires

i wish i had 2 sets of wire

but its just one.........here'* how mine are in the door from the factory






man sle i wish there was 2 sets of wires........maybe one is stuck inside the door i dont know

im 100000000% positive that you have 2 sets of wires in the door.....that is how EVERY bonne with factory tweeters are wired......they didnt change it.....you may have to peel the plastic on the door back and LOOK for it...THEY ARE THERE

lol ok i will do that tomorrow man, that would make sense too since i think it was an "8 speaker system" back in the day

pat you are 100000% wrong. there is only 1 pair of wires that goes into the door. and then there are crossover components that are glued to the back of the 5.25 with another connector for the tweeter.

You can run the factory tweeter like that but you NEED the little components that rest on the back of the stock speaker. Or you have to figure out what they are and buy aftermarket ones. I say this because the tweeter is only designed to work for a certain set of frequencies and the compnents on the back of the 5.25 filter out the unwanted freq.

When I pull my door panels I only have to undo one connector for the speakers.

EDIT: That darn kid with the wrong grill got to it first...

they must have changed the wiring in the later years????? sorry for the confusion

ok theres some kind of gray thing and a black thing on the back of the tweeter

i dont remember anything like that on the back of the 5.25, but i remember the connector for the tweeter glued back there

here'* what the back of my tweeter looks like

thoes are the 'Bass Blockers'