Need some sub advice
Thread Starter
Senior Member
True Car Nut
Joined: Jun 2007
Posts: 2,478
Likes: 0
From: New Lenox, IL

Thread Starter
Senior Member
True Car Nut
Joined: Jun 2007
Posts: 2,478
Likes: 0
From: New Lenox, IL

Thread Starter
Senior Member
True Car Nut
Joined: Jun 2007
Posts: 2,478
Likes: 0
From: New Lenox, IL

Thread Starter
Senior Member
True Car Nut
Joined: Jun 2007
Posts: 2,478
Likes: 0
From: New Lenox, IL

No, ordered it off of ebay for $5 less shipped. Plus, I had $37 in ebay bucks to put toward that, so I only ended up paying $12 and change. Now I just need to figure out how to mount it below my head unit.
Do you have that lil' pocket below your head unit? What I did on mine was cut the back of that pocket out and trimmed it enough so I could slide the EQ in to it...I made sure it was a very tight fit. Used some plumbers tape to secure it to the deck so it was supported, wired it up and was all good. And to put the cherry on top, the Acura CL was essentially the same interior as my Accord so I got ahold of the factory deck install kit which had a little spring loaded door that covered that pocket and modified the door so it worked on mine, so when I wasn't using the EQ I could just fold up the door and it looked stock
Thread Starter
Senior Member
True Car Nut
Joined: Jun 2007
Posts: 2,478
Likes: 0
From: New Lenox, IL

Nice!
Do you have that lil' pocket below your head unit? What I did on mine was cut the back of that pocket out and trimmed it enough so I could slide the EQ in to it...I made sure it was a very tight fit. Used some plumbers tape to secure it to the deck so it was supported, wired it up and was all good. And to put the cherry on top, the Acura CL was essentially the same interior as my Accord so I got ahold of the factory deck install kit which had a little spring loaded door that covered that pocket and modified the door so it worked on mine, so when I wasn't using the EQ I could just fold up the door and it looked stock
Do you have that lil' pocket below your head unit? What I did on mine was cut the back of that pocket out and trimmed it enough so I could slide the EQ in to it...I made sure it was a very tight fit. Used some plumbers tape to secure it to the deck so it was supported, wired it up and was all good. And to put the cherry on top, the Acura CL was essentially the same interior as my Accord so I got ahold of the factory deck install kit which had a little spring loaded door that covered that pocket and modified the door so it worked on mine, so when I wasn't using the EQ I could just fold up the door and it looked stock

Thread Starter
Senior Member
True Car Nut
Joined: Jun 2007
Posts: 2,478
Likes: 0
From: New Lenox, IL





