Antenna adapter question - Finally Installed - 03/28/08
#21
I used one of those spider adapters for years in my lumina and 95. It worked with no problems. Darcy is just anal
The install looks great, but there is quite a bit of gap around the dash bezel and HU isn't there?
The install looks great, but there is quite a bit of gap around the dash bezel and HU isn't there?
#22
Junior Member
Posts like a Ricer Type-R
Messing with antenna adapters like that isn't a simple thing.
Antennas are not simple creatures. In antenna applications like that spider, you can get different problems depending on whether you leave it as is, short the other legs, leave them open, or put a load on them.
Your solution was the best of all options, but it'* still not an ideal solution. I would call it temporary, and pursue a permanent solution.
Antennas are not simple creatures. In antenna applications like that spider, you can get different problems depending on whether you leave it as is, short the other legs, leave them open, or put a load on them.
Your solution was the best of all options, but it'* still not an ideal solution. I would call it temporary, and pursue a permanent solution.
#24
Senior Member
Posts like a 4 Banger
Join Date: Apr 2007
Location: Bountiful, UT
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Well that looks pretty sweet. Just gotta fill in the gaps. I was thinking of picking one up myself but opted for a 5 channel amp instead. They are very nice decks and have the option of bluetooth and many more goodies built in. Ebay has them for well under $200 and newegg.com carries both models but has been out of stock on the 700 for a few weeks.
http://www.newegg.com/Product/Produc...82E16882108257
btw how did the right side of the opening get chewed up? Was that neccesarry or just bad luck?
http://www.newegg.com/Product/Produc...82E16882108257
btw how did the right side of the opening get chewed up? Was that neccesarry or just bad luck?
#26
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Feb 2004
Location: Fargo, ND
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
The trim was already chewed up like that when I bought it. I also didn't use the spider adapter, I picked up the right one from BestBuy. I'm not sure how I'm going to get rid of the gap around the deck. Any ideas?
#27
Senior Member
Posts like a 4 Banger
Join Date: Apr 2007
Location: Bountiful, UT
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
sometimes you can find textured sheet styrene in home improvement or hobby stores. If you can only find plain sheet styrene they sell a spray texture and plastic paint that will help it match. Thats what I was thinking of doing anyway.
#28
i was just wondering if you had any problem with frequency noise interference in your front and rear speakers, because i just tried to install a cd player in my 2001 Bonneville ssei with the same wiring harness but ended up taking it out because it was getting either engine noise or frequency noise have not figured it out yet.
Thread
Thread Starter
Forum
Replies
Last Post
BarryBoy
Audio (and aftermarket electronics)
0
12-01-2007 11:10 PM
bonnie94ssei
Audio (and aftermarket electronics)
5
09-13-2006 07:13 PM