It'* gotta be PCV related.

Rob, can you take the PCV cap off, take a picture inside, remove the PCV, take another picture?

I will take pictures tonight after work and post

here are the pics
also i noticed there are a few holes in the exhaust before the muffler just on the pipe i can see some white smoke coming out of at least two spots can that cause this the check engine light is off i doubt it could cause it but just putting it out there

The PCV seems to be installed correctly...but I'm seeing moisture all over. It has to be coming from somewhere.



No, as long as any and all holes are AFTER the O2 sensor, it shouldn't trip a light.

Could the pcv be bad where would the moisture be coming from

Shake the valve itself. Does it rattle? Yes? Then its good.

If it was me, I would actually taste those water droplets to see if it tasted sweet. But that'* me.

Moisture can either be from condensation buildup after a hot/cold condition(normal during this time of year) or you have coolant going into the crankcase.

How is the coolant level anyway?

For the time being, just monitor your coolant level. Both the reservoir and radiator.

I will monitor it I haven't even driven it yet so time will tell I guess

Soo I tasted it and it'* not sweet more like a mix of water and some oil and when I take the pcv when I shake it it doesn't really rattle very easy I have to try pretty hard like it'* gummed up should it rattle more than that

Also my old UIM did not have that spring on top of the pcv just the cap put the kit came with it so I put it in should I leave it out

That spring needs to be installed. Its what keeps the valve seated in its normal position.

If the valve doesn't rattle easily when you shake it, either squirt some carb cleaner inside of it or buy a new one. There is nothing inside just that one little piece. No springs, doodads, doohickys or whatever.

How about the exhaust? Smell the exhaust when the car is first cold and then after its warmed up. It shouldn't smell sweet either.