New accesory, and some teasers!
Thread Starter
Senior Member
True Car Nut
Joined: May 2003
Posts: 8,135
Likes: 1
From: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___

Sony CDX-F7710 Deck, 52x40, XM ready, cd changer ready, MP3 capable. I also bought a unit that converts the steering wheel controls into IR signal, so I can still use em.
Wasn't Cheap though, none of it was.
Mmmm Best Buy credit card, will be paid off after WBFEST

Sticks out more than i would of liked, but im happy with the overall quality of the unit for sure!

Thats the IR sensor, until I actually mount it, it stays there, BBY put it there, the installer (who i know well) said he wasn't going to drill anything in my car, unless i wanted it done..Thank you!
All cleaned up once again



I scrubbed the bejebus out of these tonight, out drying now as we speak on my deck in the back yard.
Wasn't Cheap though, none of it was.

Sticks out more than i would of liked, but im happy with the overall quality of the unit for sure!

Thats the IR sensor, until I actually mount it, it stays there, BBY put it there, the installer (who i know well) said he wasn't going to drill anything in my car, unless i wanted it done..Thank you!
All cleaned up once again



I scrubbed the bejebus out of these tonight, out drying now as we speak on my deck in the back yard.
Originally Posted by L27Buick
looks nice, i still want to buy one of the steering wheel things.
why didnt ur installer flush mount it? did he offere it?
why didnt ur installer flush mount it? did he offere it?
Thread Starter
Senior Member
True Car Nut
Joined: May 2003
Posts: 8,135
Likes: 1
From: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___

yes the deck is a flip down/removable face plate. Im going to mount it later on myself, I just need to find a really good hiding spot for it lol.
My car get dirty? Why would I let that happen?
My car get dirty? Why would I let that happen?
If you are interested I can tell you how to do this

That'* where my IR unit is sitting. My kenwood MP828 was very picky about being a straight on shot. Most HU'* aren't that picky.
Gotta like the mod quality...no one believes it isn't stock.
Also if your gain no longer works just run a wire from the amp turn on to the amp in on the connector. You'll have gain again

That'* where my IR unit is sitting. My kenwood MP828 was very picky about being a straight on shot. Most HU'* aren't that picky.
Gotta like the mod quality...no one believes it isn't stock.
Also if your gain no longer works just run a wire from the amp turn on to the amp in on the connector. You'll have gain again
Thread
Thread Starter
Forum
Replies
Last Post
willwren
Your Ride: GM Pictures & Videos
17
Jul 12, 2005 09:33 AM






