i dont think their is a pull out clip just 3 screws in the corners im not sure cuz im not going outside to look when it like 10 deg outside.

well now wait, there is a pull out clip, but its directly on the window, and i just assumed three screws held it there when he said it lol

edit: maybe its not a pull out clip, but when i took it off i pushed up on the mirror and the mirorr came and this clip stayed on the window, slid right back in

i think tha pics would be the best way to show this

well your gonna hafta wait lol, its about 15 degrees out and im in pajamas

maybe ill get some inthe morning.

sweet...

I also found out that the Mirror lights up where the slider is to select what mode the mirror is in

You can tell it'* Spring Break...........

Pat'* got plenty of time on his hands!!!!!!

Looks great.........nice write up

1. After pulling out the pin on the visor support closer to the center line, how is the support removed. It seems to be a clip in piece, but moderate force didn't pop it out.
2. Visor light wiring: Can you say how to get to the connector. Previously when removing the visor swivel mount for replacement, I have had to cut and splice the wire at the mounting point.

Once the push clip is pulled completely out, the rest should be able to be pulled out. Try wiggling it to see if some glue or something is holding it.

If you gently and firmly tug the wires there is a connector that is stapled and duct taped to the headliner..it will come to the hole and you can unplug it. Or pull the a pillar and drop the edge of the headliner.