Question about replacing stock resonator w/ glasspack
#12
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Dec 2006
Location: SW Florida
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
From what I have read, the longer you keep the resonator/glasspack the deeper the sound and less rasp.
So for my exhaust the longest I can get in looks like a 21" length body with a 25" overall length.. which is basically identical to the stock resonator on my car. the glass pack is a 3 1/2" diameter body.. compared to the stock resonator that looks to be about a 6" diameter.
I guess I might be the guinea pig lol.. I might have to go ahead and do this.
FINAL question..if I hack off the stock resonator and put in the glasspack I HAVE to get a 2 1/4" inlet/outlet glasspack (for length reasons) Is this going to cause a problem, major restriction, etc.. in my exhaust being it is 2 1/2" from the manifolds back to the "Y".....or is it nothing to worry about being the exhaust goes down to 2 1/4" anyways once it gets to the Y and through the mufflers? From what I understand your exhaust only flows as good as your most restrictive portion..and if it is already 2 1/4" elsewhere in the exhaust it shouldnt matter to put a 2 1/4" glasspack in correct?
Thanks guys.
Last edited by YoungGunLs1; 03-16-2010 at 12:09 AM.
#14
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Dec 2006
Location: SW Florida
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
the only 25" (21" body) I have found is 2 1/4"
and I don't really want to go any shorter being the longer the better.
If that damn O2 sensor was a few inches further forward towards the cat, this would not be an issue...although if I take it to a shop to get welded I would think he could find a way to make it fit.. the shops down here suck though and try to charge extra for every little thing.. if they have to spend 2 extra minutes to heat and bend a pipe they want another $20 for it..
Last edited by YoungGunLs1; 03-16-2010 at 12:24 AM.
#15
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Dec 2006
Location: SW Florida
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Now this has my attention:
20" body, 25" overall length 2.5" inlet/outlet chambered powerstick muffler (have heard several V8'* with these and it is amazing)
http://www.classicchambered.com/classic/products.html
20" body, 25" overall length 2.5" inlet/outlet chambered powerstick muffler (have heard several V8'* with these and it is amazing)
http://www.classicchambered.com/classic/products.html
Thread
Thread Starter
Forum
Replies
Last Post
oldsintrigue1123
Performance, Brainstorming & Tuning
17
03-09-2007 02:45 PM
LittleHoov
Performance, Brainstorming & Tuning
1
08-19-2006 11:58 PM
bigJ
Performance, Brainstorming & Tuning
9
07-08-2004 12:58 AM