Need some advice on some readings from my car.
Thread Starter
Senior Member
Certified GM nut
Joined: Jul 2004
Posts: 1,912
Likes: 0
From: New York City
Need some advice on some readings from my car.
readings from my riviera with a 2.4 pulley FWI. Hi-flow cat. and 2 1992 parkavenue injectors replaced under duress (spelling) (inside joke)
Mat: 288 degrees
BLM: 137
Int: 128
Adv : 13 degrees
KR :2 degrees
this is at WOT.
Mat: 288 degrees
BLM: 137
Int: 128
Adv : 13 degrees
KR :2 degrees
this is at WOT.
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
Looks pretty normal. On a hot day, you're going to have more KR. Be careful with that. 2.4 may have been a bit too aggressive without a better exhaust, particularly ported exhaust manifolds.
Thread Starter
Senior Member
Certified GM nut
Joined: Jul 2004
Posts: 1,912
Likes: 0
From: New York City
Originally Posted by willwren
Looks pretty normal. On a hot day, you're going to have more KR. Be careful with that. 2.4 may have been a bit too aggressive without a better exhaust, particularly ported exhaust manifolds.
MAT of 288 degrees? ... really?
Is that good or bad?
Thread Starter
Senior Member
Certified GM nut
Joined: Jul 2004
Posts: 1,912
Likes: 0
From: New York City
Originally Posted by willwren
We don't have a MAT sensor. You do. I don't know what your normal readings should be. Do you have an FSM?
Hmm, I interepreted it as IAT, because my scantool says MAT instead, when I know I don't have an MAT to begin with.
