Need some advice on some readings from my car.
readings from my riviera with a 2.4 pulley FWI. Hi-flow cat. and 2 1992 parkavenue injectors replaced under duress (spelling) (inside joke)
Mat: 288 degrees BLM: 137 Int: 128 Adv : 13 degrees KR :2 degrees this is at WOT. |
Looks pretty normal. On a hot day, you're going to have more KR. Be careful with that. 2.4 may have been a bit too aggressive without a better exhaust, particularly ported exhaust manifolds.
|
MAT of 288 degrees? ... really?
|
Originally Posted by willwren
Looks pretty normal. On a hot day, you're going to have more KR. Be careful with that. 2.4 may have been a bit too aggressive without a better exhaust, particularly ported exhaust manifolds.
MAT of 288 degrees? ... really? Is that good or bad? |
Um, thats really high
|
uh-oh ummm...k Really high?! what is the norm for our cars (I hope it is just a bad sensor)
|
We don't have a MAT sensor. You do. I don't know what your normal readings should be. Do you have an FSM?
|
Hmm, I interepreted it as IAT, because my scantool says MAT instead, when I know I don't have an MAT to begin with.
|
Originally Posted by willwren
We don't have a MAT sensor. You do. I don't know what your normal readings should be. Do you have an FSM?
Hmm, I interepreted it as IAT, because my scantool says MAT instead, when I know I don't have an MAT to begin with. |
Disconnect your IAT and see what the scanner says.
|
All times are GMT -4. The time now is 09:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands