Is there a easy way of removing my huge muffler from the back of the 96 se to replace it with a nice flow master? I looked at it the other day and all I could think of was lobing it off.. please tell me this is not true!

There should be two bolts holding the ends of the muffler up, and then just the single pipe going in. Napa and other parts stores have an exhaust pipe cutter that looks like a pair of pliers with a bike type chain on it. Works great for cutting.

So I do have to cut off the muffler?

Well..the pipe in front of the muffler. Our exhaust systems are originally welded together to make one piece after the catalytic converter.

you can only mount a muffler in the stock location. ill take some pics of mine tom. i have 80 series and we had to make custom hangers.

here ya go.

heres the passenger side hanger


the weld from the muffler to the 90* bend for the tip


drivers side hanger


the 2.5" 92 se mid pipe without the resonator


the hanger by the cat


if you need any other pics or info, lemme know.

BTW, i <3 my flowmaster and so does everybody who has heard it