Muffler help
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
Muffler help
Originally Posted by darkhorse
Hi, I have been browsing post for hours trying to find which performance muffler to get to replace my rotted out muffler, and I stumbled on the below post. Is this muffler going to work for my 92 SSEi, and still retain the stock looking tips and exhaust pipes. Because the pipes look okay, just the muffler has a hole.
Thanks, I would appreciate any help
Thanks, I would appreciate any help
Originally Posted by willwren
You have the SSEi outlets in the rear bumper, so you want a Magnaflow crossflow muffler with 2.5" inlet and dual 2.5" outlets. Inlet and one outlet on one side, outlet on the other side. You want the F-body (Camaro/Firebird etc) muffler. It'* the same setup as ours.
2.5" cat is fine. Remember that you need the O2 bung.
2.5" cat is fine. Remember that you need the O2 bung.
Thread
Thread Starter
Forum
Replies
Last Post
98bonnie
Performance, Brainstorming & Tuning
2
Sep 7, 2008 07:20 AM
bonnienoclyde
Performance, Brainstorming & Tuning
26
May 17, 2007 01:00 AM