Modified UIM Runners & Ported LIM.....
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2007
Location: St. Pete Beach, FL
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Modified UIM Runners & Ported LIM.....
I was starting to lose a bit of coolant over the past few weeks, so I decided to swap LIM gaskets and add a new UIM & gaskets, cleaned the TB and installed a new MAP sensor. I did nothing crazy on the LIM, I had a spare, so I worked on that, just in case. I just cleaned up the ports jagged edges and got as much crud buildup off it as I could. I modified the UIM runner'*, like TheDude did his: http://www.bonnevilleclub.com/forum/...ic.php?t=93856. Lower RPMs it does much better, revs to 5750ish now instead of 5500, the pull at higher RPMs is much better, Revs faster, best mod I've done so far. From a dead stop and the TC off I can squeal the 235 wide Pirelli'* without a hitch. Used FelPro LIM gaskets and Dorman UIM, Runners & Gaskets.
Super Mod!
Super Mod!
#3
Senior Member
Posts like a Turbo
Join Date: Sep 2007
Location: Saginaw, MI
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
The best part is the price..............FREE!! I still havent had the time to pull all my plug, but I have not encountered any problems. Glad to hear it worked for anoth person too.
Thread
Thread Starter
Forum
Replies
Last Post
OLBlueEyesBonne
Forced Induction
20
10-13-2006 02:55 AM