Modified UIM Runners & Ported LIM.....
 

I was starting to lose a bit of coolant over the past few weeks, so I decided to swap LIM gaskets and add a new UIM & gaskets, cleaned the TB and installed a new MAP sensor. I did nothing crazy on the LIM, I had a spare, so I worked on that, just in case. I just cleaned up the ports jagged edges and got as much crud buildup off it as I could. I modified the UIM runner's, like TheDude did his: http://www.bonnevilleclub.com/forum/...ic.php?t=93856. Lower RPMs it does much better, revs to 5750ish now instead of 5500, the pull at higher RPMs is much better, Revs faster, best mod I've done so far. From a dead stop and the TC off I can squeal the 235 wide Pirelli's without a hitch. Used FelPro LIM gaskets and Dorman UIM, Runners & Gaskets.

Super Mod!

I have been in Jason's car a few times, and I agree, it does pull pretty hard :twisted:

The best part is the price..............FREE!! I still havent had the time to pull all my plug, but I have not encountered any problems. Glad to hear it worked for anoth person too.