Going to the track (Will seafoam strip rotors?)
#12
Senior Member
Certified Car Nut
Thread Starter
Alrighty, car is prepped. Miscellaneous stuff cleaned out including stereo box (damn that thing is heavy), left with some tools, multimeter, scantool, spare ignition coil, work gloves, spare tire and jack. I figured out the ELC, put in the toluene.
Any other tips?
What is the module above the airline selector valve?
Any other tips?
What is the module above the airline selector valve?
#14
Junior Member
Posts like a Ricer Type-R
John, you're ready. Drop your front tire pressure to 25psi when you get there. Lower it to 20 if you can't hook up with a preload of no less than 1500 rpm'*.
#15
Senior Member
Certified Car Nut
Thread Starter
Originally Posted by llBlazin_llLo
What track are you going to?
Bill, I hadn't even thought about lowering the tire pressure, thanks. I'm hoping I can get some ice bags on the way.
#16
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
Originally Posted by jwikoff99
Alrighty, car is prepped. Miscellaneous stuff cleaned out including stereo box (damn that thing is heavy), left with some tools, multimeter, scantool, spare ignition coil, work gloves, spare tire and jack. I figured out the ELC, put in the toluene.
Any other tips?
Any other tips?
#18
Senior Member
Posts like a Northstar
Join Date: Jan 2003
Location: Northern KY
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
Are you sure you do not have TC my 93 is a base model the only options thet it has is benchseats and I have TC just no button for it. There is a fuse to disable it if you just do not have the button
#19
Senior Member
Certified Car Nut
Thread Starter
I'm pretty sure, I have an SSE with the button spaces for tranny modes, TC, and ECC (not an option till 94 I think). But, the only buttons I have there are the tranny modes. Nor do I have a traction control module under the hood.
#20
Junior Member
Posts like a Ricer Type-R
Traction was standard on the SSE, but you may not have the switch to disable it. Your PMV assembly should have a silver pump on top with a yellow sticker. I'm betting you DO have it. In fact, if you disconnect the PMV assembly under your airbox, you should get a Traction and ABS warning light. Run like that.