Fender Well Intake
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2004
Location: Fitchburg Ma _ToastedRice_
Posts: 6,837
Likes: 0
Received 0 Likes
on
0 Posts
Fender Well Intake
Ok, So i have my PCM tray on order, have a 3.5inch K&N filter, and now i need to find something that will make a suitable template that i can bend to shape to snake through the fenderwell and hold its shape while i take it to an exhaust shop to have a piece of Stainless Steel pipe bent for it.....
#3
Senior Member
Certified Car Nut
Join Date: Aug 2004
Location: My reclining computer chair
Posts: 11,269
Likes: 0
Received 0 Likes
on
0 Posts
Yep....
Intense tubing would be better. You need the flex beacuse of the touque.
Check out Wills video of "Greenzilla"
http://www.williamwren.com/flex.mpg
Intense tubing would be better. You need the flex beacuse of the touque.
Check out Wills video of "Greenzilla"
http://www.williamwren.com/flex.mpg
#4
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2004
Location: Fitchburg Ma _ToastedRice_
Posts: 6,837
Likes: 0
Received 0 Likes
on
0 Posts
no offense to intense and any of those out there using their intake tubing but THAT **** IS GHETTO and WAY overpriced.. im not worried about the flex, i have it all planned out in my equasion..
#6
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fender Well Intake
Originally Posted by toastedoats
Ok, So i have my PCM tray on order, have a 3.5inch K&N filter, and now i need to find something that will make a suitable template that i can bend to shape to snake through the fenderwell and hold its shape while i take it to an exhaust shop to have a piece of Stainless Steel pipe bent for it.....
I used to be an industrial electrician and have used this method many times on tricky pipe bends up to 6".
Thread
Thread Starter
Forum
Replies
Last Post
radomirthegreat
Performance, Brainstorming & Tuning
49
10-15-2007 04:43 PM
Gumball
Performance, Brainstorming & Tuning
23
07-30-2005 11:20 PM
19bonne93
Performance, Brainstorming & Tuning
20
12-02-2004 12:10 AM