Ok so the local club grand prix took a trip to the dyno and i joined in.... the torque numbers seemed a little low for just about everyone...
This is what came out for me
145.06whp @ 4200
91.62wtq @ 4100

Doesnt that seem a little screwy?

That torque number is WAY too low.

Traction control pulling timing? I'm not as familiar with 00+, but is that a possibility?

But yes, that torque number is WAY low. HP is a little low, also.

thats what im sayin.. if it was that low i shouldnt have been able to lay a 12 foot patch leaving the parkinglot

i pulled the ABS fuse.. so nothing was holding it back

Does the car have stabiltrak? What model, year. Both of those numbers seem low. I'm guessing TM kicked in.

Did you pull your Wheel speed sensors?

Did you do the pull in 2nd gear?

You may want to read http://www.3800tech.com/forum/showthread.php?t=67

yes, second gear pull.

no stabilitrack or traction controll on the car.

wow, those are WAY low. I'd ask for a refund.....

there wasnt much for a refund.. it cost the club 300 for the day.. 15 people ran so it was really cheap