Damien Runs but with issues..help needed
#12
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
Did I make mention that its going to a private extreamly reputable shop in March for exhaust work..aka..new 2.5" piping, resonator, and muffler..probably some pretty tips too
#13
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
Sounds pretty good! I have some similar parts waiting to go on
I always hear people talking about hot wire kits in addition to their high flow pumps. Although no one to my knowledge makes a hot wire kit for us 96-99 guys (Full throttle & Casper’* hotwire don’t work) are you going to beef up the wiring to the pump in any way?
Ed
I always hear people talking about hot wire kits in addition to their high flow pumps. Although no one to my knowledge makes a hot wire kit for us 96-99 guys (Full throttle & Casper’* hotwire don’t work) are you going to beef up the wiring to the pump in any way?
Ed
#15
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
Beef up the wiring?
If its needed..but I kinda doubt it..that pump should put out lots..
All I gotta really watch is when she hits third gear...does the fuel pressure drop?
My bet says..nope..not anymore!
If its needed..but I kinda doubt it..that pump should put out lots..
All I gotta really watch is when she hits third gear...does the fuel pressure drop?
My bet says..nope..not anymore!
#16
Junior Member
Posts like a Ricer Type-R
Originally Posted by 2000SilverBullet
exhaust pipes.
The hot wire kit is mandatory with the 255lpm pump.
The hot wire kit is mandatory with the 255lpm pump.
#17
That'* the point to beefing up the wiring. The pump draws more power. The wiring is not large enough. The voltage drops and the pump runs at a lower pressure. The heavier wiring promotes a higher voltage......as much as 1.5 volts....so the pump will run faster and produce more pressure and flow.
edit...maybe it'* only for the newer Bonnes
.....maybe it'* a sales gimmick. Just reiterating what I read on the Vendor'* site.
edit...maybe it'* only for the newer Bonnes
.....maybe it'* a sales gimmick. Just reiterating what I read on the Vendor'* site.
#18
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
If i was to update the wiring, it would be custom..and do-able.
Like i says though..Ive got some scanning and mechanical testing to do
Fine..heres a few pics for those of us who cant wait
lol
Like i says though..Ive got some scanning and mechanical testing to do
Fine..heres a few pics for those of us who cant wait
lol
#19
Junior Member
Posts like a Ricer Type-R
Looks good! Tip for touch-up (I just did this today) get it on the car and heat-soaked at idle. Spray some wrinkle into the cap, and dab it on the spots you need to with a q-tip. Works great.
I can't even tell which damn rib I touched up this morning.
I can't even tell which damn rib I touched up this morning.
#20
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
Looks good! Tip for touch-up (I just did this today) get it on the car and heat-soaked at idle. Spray some wrinkle into the cap, and dab it on the spots you need to with a q-tip. Works great.
Damien is its own oven..capable of alot of various temps