what are these LED's called?
#1
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
#4
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
on this page I found 2mm Axial Surface Mount "Gull Wing"
http://www.ledtronics.com/markets/smt_index.htm
but, I need blue, and I only need about 25-50.
http://www.ledtronics.com/markets/smt_index.htm
but, I need blue, and I only need about 25-50.
#6
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Fitchburg Ma _ToastedRice_
Posts: 6,837
Likes: 0
Received 0 Likes
on
0 Posts
http://www.mouser.com/Search/Product...PSnWhT1Q%3d%3d
unfortunately they dont have a spec sheet on this.. its teh best i could find on short notice.. if you dont find anything ill try to see what the engineers at work can come up with tomorrow
unfortunately they dont have a spec sheet on this.. its teh best i could find on short notice.. if you dont find anything ill try to see what the engineers at work can come up with tomorrow
#7
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
They are different from what?
I wanna make these blue
TC button
IMG_3509-1.jpg
Heated seat switch button
IMG_3513.jpg
I wanna make these blue
TC button
IMG_3509-1.jpg
Heated seat switch button
IMG_3513.jpg
#8
Senior Member
Posts like a Corvette
Join Date: Nov 2006
Location: Alberta, Canada
Posts: 1,446
Likes: 0
Received 0 Likes
on
0 Posts
I've purchased many electronic components (including the LED'* for my nav unit backlighting conversion) from DigiKey. They have overnight air freight for about $6.00 and orders can be placed online. You'll have to look through the catalog to see what you want.
You may also need to change the current limiting resistor as well.
http://www.digikey.com/
If your traction control switch is the same as mine, the two LED'* on that board are different. The one which you've circled is the traction on indicator and the shape of the lens is different than the one for the backlighting (which is flat and projects the light differently). Your original post didn't specify if you were trying to change the indicator, backlighting or both. Not that it matters in your case, but the two are also different colours. Here'* a profile shot.
You may also need to change the current limiting resistor as well.
http://www.digikey.com/
Originally Posted by harofreak00
They are different from what?
Thread
Thread Starter
Forum
Replies
Last Post