What did you do with your car/truck or shop today?
Senior Member
True Car Nut
Joined: Mar 2010
Posts: 7,124
Likes: 8
From: Portage mi
Ended up putting a new master cylinder and bypassing gm'* little wanna be rear abs bull crap on the turd last night it now holds the title of best feeling brake pedal in any vehicle i own,,,taking today off
Senior Member
Certified GM nut
Joined: Jan 2011
Posts: 2,112
Likes: 19
From: Newfoundland, Canada
IMAG0090.jpg
Got some more of my leds today. Might put them in when i get out of class, if its not raining.
Got some more of my leds today. Might put them in when i get out of class, if its not raining.
Senior Member
True Car Nut
Joined: Dec 2009
Posts: 9,616
Likes: 594
From: western,ny state
i like having the abs, especially on something like mine that weighs as much as a bus. ive been fighting my yukons 4whl abs since i got it, pretty much got her figured out. ive replaced almost everything but the abs unit itself, but when ever you goto bleed it you have the same issues again. i got a couple tips from an old chevy mechanic on tighten up the rears all the time, turning the key on while bleeding, then go out on a dirt road adn jam on the brakes a few times, then repeat. that got as much feel as it ever had.
Senior Member
True Car Nut
Joined: Mar 2010
Posts: 7,124
Likes: 8
From: Portage mi
hm no this truck had some stupid little hold off valve type deal. supposed to make it so the back brakes engage After the fronts to keep them from locking up and it had issues so the pedal was soft like it was full of air but i ran a big bottle and a half of fluid through it so it had to go and now they work great
Senior Member
Certified GM nut
Joined: Jan 2011
Posts: 2,112
Likes: 19
From: Newfoundland, Canada
I attempted to put them in today, but after blowing the fuse for my turn signals and park lights, burning my thumb on the old bulb, and spending an hour and a half in the freezing cold rain only to find out one of the bulbs has a bad connection, I gave up. Its supposed to be sunny on saturday, so I'll probably try it again then.
Member
Posts like a V-Tak
Joined: Nov 2010
Posts: 77
Likes: 0
Changed the stuts and got the bonneville aligned changed the oil, on the truck changed the rad tranny fluid and filter oil change and lube front diff oil change still have the rear to do and the t-case. Also the driverside door dorr pins.
BANNED
True Car Nut
Joined: Oct 2009
Posts: 5,989
Likes: 4
From: Usa
I attempted to put them in today, but after blowing the fuse for my turn signals and park lights, burning my thumb on the old bulb, and spending an hour and a half in the freezing cold rain only to find out one of the bulbs has a bad connection, I gave up. Its supposed to be sunny on saturday, so I'll probably try it again then.