hi all ..

iam working on gmc yukon 04 5.3L

the car got : service ride light on . and service tire monitor on ,

i put my scantools .. there is c0292 fault in stored DTC .

car condition :

new aftermarket rims ( R 20 ) 285 - 50

new rear suspension OEM ,

the compressor is working coz i hear it when car starting .

any suggestion ?

did you put new tpms sensors in the rims? have them programed? you sure the rear were the right ones for the vehicles options?

Thanx ..

I don know about tpms ,, but when i try to relearn them , no response from FL .

what do u mean about the rear option ?

dont know what fl is

the different suspensions had different shocks, the oem ride leveling ones had sensors, some didnt

Hello ..

FL = front left tire .. So when u start relearn the tire sensor .. U must begin from left front tire .

The suspention is sure same one

i dont have access to a gm manual for that, which is what you need to see if the bcm is seeing the right thing from the suspension. and to see if the tpms sensors need programed or there isnt any, probably need to take it to a dealer so they can look at it with the tech 2 scanner.