95 GMC K 2500 Trans Faults and Cluster acting erratic
#11
Junior Member
Posts like a Ricer Type-R
Thread Starter
Wanted to Update I fixed the truck. I checked all the speed sensors and circuits which all tested good. So I tried to follow the alldata pin point test which is to use a tech one to check operation of the solenoids. I do not have a tech 1 so I basically checked continuity on all the solenoid circuits which had no issues, it lead me to believe that the ignition switch failed because it is so intertwined in these circuits so I basically just threw in the part and bam. Speedo works, Tach works, gear shift position works, shifts through all the gears perfectly. it was a 140.00 dollar part... which sucks, but hey my truck works so I am happy. Thanks for your help rjolly87
The following 2 users liked this post by Jconolly:
CathedralCub (01-24-2018),
Soft Ride (01-22-2018)
#12
Senior Member
True Car Nut
I would let it ride a bit before calling it fixed. You mentioned that the last timeit acted bad on the second start.
Hopefully it holds together...
Hopefully it holds together...
#13
Junior Member
Posts like a Ricer Type-R
Thread Starter
I agree I have started several times and driven over 60 miles today and not even the slightest hiccup. I will be driving this all next week for work and I will update if the repair is still holding up.
#14
Junior Member
Posts like a Ricer Type-R
Thread Starter
Wanted to update on the truck have put over 1000 miles on it since replacing the ignition switch, pulled several 12k trailers, lots of city/highway drive loaded and unloaded. not a single issue the truck has performed flawless since replacing the ignition switch.
The following 3 users liked this post by Jconolly:
#15
Senior Member
True Car Nut
Thanks for the update! Glad you nailed it in the first shot. This is a perfect example of how a competent mechanic approaches the situation as a whole, and doesn't just start throwing parts at the codes that are popping up as symptoms of the root cause.
Great work!
Great work!
The following users liked this post:
Soft Ride (02-08-2018)
#16
Junior Member
Posts like a Ricer Type-R
Thread Starter
Thanks for your help and keeping me focused. I wanted, and was tempted to start throwing parts at it, but i broke down and just tested components which all pointed to one thing. If I have any other confusing issues I will for sure post them to this site.
The following users liked this post:
Soft Ride (02-08-2018)
Thread
Thread Starter
Forum
Replies
Last Post
Thunderz24
Everything Electrical & Electronic
10
03-12-2007 10:44 PM