2000 Escalade air conditioner problem
Thread Starter
Senior Member
Posts like a Supercharger
Joined: Jul 2015
Posts: 160
Likes: 21
From: Chico, California (USA)
2000 Escalade air conditioner problem
Ok, so I have a 2000 Escalade. The rear air blows cold but the front air does not.
Air blows thru vents properly.
Temperature control **** works properly.
Air blend door actuator works properly.
Air blend door movement is good.
I don't have access to an a/c manifold guage set, but can/will buy one if necessary.
What else is there to look into?
What is the discharge thing called inside the HVAC box. I replaced one of those things on a Mitsubishi Montero and the air conditioner began working properly.......but in all honesty, I replaced many of the Mitsubishi a/c parts. That being said, I can't pinpoint the part that was actually at fault in that particular situation.
Air blows thru vents properly.
Temperature control **** works properly.
Air blend door actuator works properly.
Air blend door movement is good.
I don't have access to an a/c manifold guage set, but can/will buy one if necessary.
What else is there to look into?
What is the discharge thing called inside the HVAC box. I replaced one of those things on a Mitsubishi Montero and the air conditioner began working properly.......but in all honesty, I replaced many of the Mitsubishi a/c parts. That being said, I can't pinpoint the part that was actually at fault in that particular situation.
Senior Member
True Car Nut
Joined: Feb 2014
Posts: 2,878
Likes: 1,097
From: Worcester, Ma.
Well, if the rear air is working, there should be enough of a charge in the system.....
You say the temp door is working......
I am thinking you are talking about the thermal expansion valve?
You say the temp door is working......
I am thinking you are talking about the thermal expansion valve?
Thread
Thread Starter
Forum
Replies
Last Post
