Random request for bored Photoshoppers Re grille guards/ pushbars
#1
Senior Member
True Car Nut
Thread Starter
Random request for bored Photoshoppers Re grille guards/ pushbars
I think I am beginning to turn a new page with ownership of the PA, and rolling beater status on it. It'* nice having a car that looks beat on, because then you don't have to worry too much about local idiots.
One avenue I am curious about is grill guards/ pushbars.
So, I am hoping to get an idea what it would look like.
Here are pics of just about any angle/lighting you may want:
https://www.gmforum.com/your-ride-gm...-later-304874/
For styles, I would like to see this style of guard, from the caprice:
http://www.skymagik.net/~storm/pics/caprice/95front.jpg
However I am also curious about other styles too, including full wrap arounds.
Thanks in advance guys, I am definitely excited to see what pops up here.
Full size pics can be had here also:
20YearRun Photos by rjolly87 | Photobucket
One avenue I am curious about is grill guards/ pushbars.
So, I am hoping to get an idea what it would look like.
Here are pics of just about any angle/lighting you may want:
https://www.gmforum.com/your-ride-gm...-later-304874/
For styles, I would like to see this style of guard, from the caprice:
http://www.skymagik.net/~storm/pics/caprice/95front.jpg
However I am also curious about other styles too, including full wrap arounds.
Thanks in advance guys, I am definitely excited to see what pops up here.
Full size pics can be had here also:
20YearRun Photos by rjolly87 | Photobucket
#2
Senior Member
Randall,I am not that good at photos shop. One thing I can tell you from experience with my Setina push bar is,,they are not that light and my jeep springs sagged quick. I did a proper suspension lift and that is ok. Mounting is another story as well. If not done right they tend to be how do I say it, a bit of a loose push over...If a car has a real frame great, if unibody expect re-enforcing the area with steel, before mounting. I also had to use a down post removable, welded to skid plate. Now it'* a real push bar.
__________________
1997 Buick Pk Ave (Soft Ride) Suspension!
1997 Buick Pk Ave (Soft Ride) Suspension!
Last edited by Soft Ride; 05-22-2014 at 01:25 AM. Reason: Correct spelling.
The following users liked this post:
GunsOfNavarone (05-21-2014)
#3
Senior Member
True Car Nut
I gave it a go, but had trouble getting the guard to look right in the pic, it is not too bad though, just not my best work.
Thread
Thread Starter
Forum
Replies
Last Post