NEWSFLASH! (problem solved on page 3)
#92
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by harofreak00
nate, i shipped those heads to OH i believe, sold them to a guy on ClubGP
harofreak00 (1:00:51 AM): wtf are you talking about.. shiping heads?harofreak00 (1:00:59 AM): i shipped heads to a guy on clubgp
LakevilleSSEi (1:01:33 AM): didn't know
harofreak00 (1:01:44 AM): what are you talking about then
LakevilleSSEi (1:01:56 AM): i only knew of the ones u gave me that i ended up shipping
harofreak00 (1:02:14 AM): ohhhh. those
LakevilleSSEi (1:02:15 AM): ya
harofreak00 (1:02:29 AM): well i did some others also
LakevilleSSEi (1:03:09 AM): guess so lol
LakevilleSSEi (1:01:33 AM): didn't know
harofreak00 (1:01:44 AM): what are you talking about then
LakevilleSSEi (1:01:56 AM): i only knew of the ones u gave me that i ended up shipping
harofreak00 (1:02:14 AM): ohhhh. those
LakevilleSSEi (1:02:15 AM): ya
harofreak00 (1:02:29 AM): well i did some others also
LakevilleSSEi (1:03:09 AM): guess so lol
#94
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
How long have those heads been sitting? Any rust? Valves still free?
#95
Senior Member
Certified Car Nut
Food for thought... visible differences between 92 & 93 L67 are minimal.
Different bolts (no collar and thread size), guide plates (do the 93 cradle the pushrods like this?) , and depression around the oil drain hole above the spring.
Different bolts (no collar and thread size), guide plates (do the 93 cradle the pushrods like this?) , and depression around the oil drain hole above the spring.
#97
here are my 93 SSE SC heads. Going to look at the old 93 SSEi heads and the new motor that'* in the car (since i am not sure if it is a 92 or 94 motor)
Would it be worth $40 for a set of 94/95 heads, or are just the roller rocker portion needed from them?
And will L27 parts fit L67 for atleast the roller rocker portion?
Would it be worth $40 for a set of 94/95 heads, or are just the roller rocker portion needed from them?
And will L27 parts fit L67 for atleast the roller rocker portion?
#99
Originally Posted by MACDRIVE
#100
Junior Member
Posts like a Ricer Type-R
Thread Starter
Originally Posted by MACDRIVE
JF, the heads are what you want IF you intend to upgrade rockers. The 94/95 Rollers from an L67 or 93/94 rollers from an L27 will bolt right to it yours. Both the SSE/SC
and SSEi will have non-rollers for 93.
Looking at those parts in your pic, they look like they've been deep-fried. Did that car
overheat or go too long between oil changes at some point?