Info about your Ride...
Thread Starter
Senior Member
Posts like a Camaro
Joined: Jan 2002
Posts: 971
Likes: 1
From: Simi Valley, CA
I guess by "popular" demand, or just plain common sense we should have a info section on these boards. Soo.. I guess I shall start this post and we can compile a list together. So list your year of Bonny and what engine comes w/ it and specs/features like air suspension and other little things that might help people figure out what to do. I'll start first I guess...
I got a 1999 Bonneville SE so I got the Gen II 3800 Series w/ 4T65E transmission engine that supposedly makes..:
205 HP @ 5200RPM
230 Ft/Lbs @ 4400 (I think somehwere in the 4'*)
_________________
1999 Bonneville SE
Mods: 3" Custom Catback Exhaust, Custom 3" Intake, MAF Screen Removed, Thrasher Shift Kit (highest setting
)
<font size=-1>[ This Message was edited by: 99BonnevilleSE on 2002-03-04 21:22 ]</font>
I got a 1999 Bonneville SE so I got the Gen II 3800 Series w/ 4T65E transmission engine that supposedly makes..:
205 HP @ 5200RPM
230 Ft/Lbs @ 4400 (I think somehwere in the 4'*)
_________________
1999 Bonneville SE
Mods: 3" Custom Catback Exhaust, Custom 3" Intake, MAF Screen Removed, Thrasher Shift Kit (highest setting
)<font size=-1>[ This Message was edited by: 99BonnevilleSE on 2002-03-04 21:22 ]</font>
Senior Member
Posts like a Turbo
Joined: Jan 2002
Posts: 236
Likes: 0
1999 SLE
chrome SSEi rims 16x7
duals
gm groundeffects.
3800 series II
cai= 9 inch K&N stuck into the flexible rubber thinggy on the throttle body.
clear corners = write up on my webpage.
I cant really thinkof anything special just your basic SSEi w/ out the */c and badges
chrome SSEi rims 16x7
duals
gm groundeffects.
3800 series II
cai= 9 inch K&N stuck into the flexible rubber thinggy on the throttle body.
clear corners = write up on my webpage.
I cant really thinkof anything special just your basic SSEi w/ out the */c and badges
Thread Starter
Senior Member
Posts like a Camaro
Joined: Jan 2002
Posts: 971
Likes: 1
From: Simi Valley, CA
Quick question SKZA, what Infinity speakers did you use in the door? did you use 4x6 w/ some tweeters?
And boseman350, what is the GM Groundeffects, there is a body kit for out car? Or did you graft one to your car?
But yeah, I will be willing to write up a CAI page, I just need hosting space... Hmm.. Teubok, would it be possible if I have some space for a webpage of my own, it would be small and effecient, little bandwidth would be taken since not too many people care about Bonneville'* unless I made it pretty w/ Flash and such... But it would help me out if you could just give me like 10MB to work with then I could start writing articles. Just let me know through email or here.
And boseman350, what is the GM Groundeffects, there is a body kit for out car? Or did you graft one to your car?
But yeah, I will be willing to write up a CAI page, I just need hosting space... Hmm.. Teubok, would it be possible if I have some space for a webpage of my own, it would be small and effecient, little bandwidth would be taken since not too many people care about Bonneville'* unless I made it pretty w/ Flash and such... But it would help me out if you could just give me like 10MB to work with then I could start writing articles. Just let me know through email or here.
Thread Starter
Senior Member
Posts like a Camaro
Joined: Jan 2002
Posts: 971
Likes: 1
From: Simi Valley, CA
Ok, well I dont need that groundeffects since I will be lowering my car. But as for the 5.25 component, did you car come w/ 4x6 stock and you just "stuffed" in the components. I know there is a ton of space I just need to measure to make sure the magnet doesnt get interfered w/ by the metal door.
Thread Starter
Senior Member
Posts like a Camaro
Joined: Jan 2002
Posts: 971
Likes: 1
From: Simi Valley, CA
Actually my door panels are the same size as the SLE or SSE or even SSEi. The only difference is that above SE you guys get the 5.25 component but same size door, and I have 4x6 (Boo!). I have the hole for the tweeter also but it has a delete, but I plan on buying the screens. I might add extra tweeters in the air vents for more power. But I should be able to fit a 5.25 component easily in my front doors.
Senior Member
Posts like a Corvette
Joined: Jan 2002
Posts: 1,587
Likes: 0
From: Cali
On 2002-03-07 20:18, skza wrote:
Yes, my car also came with stock front components. 99BonnevilleSE you might be able to get some door panels of a similar bonne and have factory space for components.
I love my kappas and plan on sticking with them. One thing I am going to do is get 2 sets of Kappa Perfect 6.5" components, mount them in the front and rear. I love my 6x9'* for bass, but the rear mounted, forward facing stock tweeters sounded awesome.
Currently, I am in the process of getting the garage rash removed from my bumpers. White scuff marks just don't look nice on red cars.
The body shop I use is also known across the state of Michigan for their fiberglass abilities. I'm thinking of some custom ground effects. I really want to replace the side moulding with something that has less moulding. If you look at the photoshop rendering of what I want my car to look like in my sig, you'll see what I mean. I also want some fender flares to accompany my wider rims when I get them. We'll see, its all up in the air right now.
Yes, my car also came with stock front components. 99BonnevilleSE you might be able to get some door panels of a similar bonne and have factory space for components.
I love my kappas and plan on sticking with them. One thing I am going to do is get 2 sets of Kappa Perfect 6.5" components, mount them in the front and rear. I love my 6x9'* for bass, but the rear mounted, forward facing stock tweeters sounded awesome.
Currently, I am in the process of getting the garage rash removed from my bumpers. White scuff marks just don't look nice on red cars.
The body shop I use is also known across the state of Michigan for their fiberglass abilities. I'm thinking of some custom ground effects. I really want to replace the side moulding with something that has less moulding.
If you look at the photoshop rendering of what I want my car to look like in my sig, you'll see what I mean. I also want some fender flares to accompany my wider rims when I get them. We'll see, its all up in the air right now.
Member
Posts like a V-Tak
Joined: Jan 2002
Posts: 92
Likes: 0
From: Martin Tn.
SO CLEAN ONE'* 98SLE. Black with tan interior.Stock stereo with cd, a Pioneer 12 disc changer in the trunk.All interior lights are blue,door lights blue and a 18in.blue neon under the dash.15% tint all around.Under the hood is spotless and all stock at this time.On the out side I'm riding on 225/16/60 Aquatread 3'* and EPIC 5 spoke chrome plated wheels,look like the old Creager rocket'* or the 97-99 Catera chrome wheels.Got vent shades.Got 1/4in,black pin stripe over my tail lights for a more blacked out look.Blacked out my rear reflectors.Blue bulbs in license plate area ,smoke license plate cover.Polished edges on exhaust tips with centers painted gloss black,nice look.I've got chrome lusion pin striping in the top groove along the front fender to the front door and in the rear groove from the back door around to the trunk.1/4in.wide.Also got 1/8in.wide chrome lusion stripe around each lower groove on the bottom panals rapping around the front and rear.A kick *** look on a sunny day.I get bright purple,bright blue, bright green,and a goldish color all in one stripe.Up front I've got Diamond Blue driving lights and Diamond Blue projector fog lights.Eyebrows on my head lights.Head light covers.Both home made.These look great being on a black car.Also added a small diamond shaped aluminum mesh for a custom grill incert.Also did the lower three openings under the grill around my fog lights.Have to cut and mold to fit but the results are well worth it.Just ordered today 3/16/02 the LUND hood scoop for 00-01 Bonnevilles, mediums 13,1/2in.W x26in.L 2 1/2 H.Parts no.80002.they will be in Monday.I'll let yall know about them next week.The Advance Auto parts store here in town have 31 orders for these hood scoops right now and the warehouse dosnt know when they will get any.Hot item right now I guess.Well I guess thats about it,until next time.SO CLEAN ONE L8TR.
Senior Member
Posts like a Corvette
Joined: Jan 2002
Posts: 1,587
Likes: 0
From: Cali
On 2002-03-07 20:18, skza wrote:
Yes, my car also came with stock front components. 99BonnevilleSE you might be able to get some door panels of a similar bonne and have factory space for components.
I love my kappas and plan on sticking with them. One thing I am going to do is get 2 sets of Kappa Perfect 6.5" components, mount them in the front and rear. I love my 6x9'* for bass, but the rear mounted, forward facing stock tweeters sounded awesome.
Currently, I am in the process of getting the garage rash removed from my bumpers. White scuff marks just don't look nice on red cars.
The body shop I use is also known across the state of Michigan for their fiberglass abilities. I'm thinking of some custom ground effects. I really want to replace the side moulding with something that has less moulding. If you look at the photoshop rendering of what I want my car to look like in my sig, you'll see what I mean. I also want some fender flares to accompany my wider rims when I get them. We'll see, its all up in the air right now.
Lee
_________________
<font size=-1>[ This Message was edited by: skza on 2002-03-07 20:20 ]</font>
Yes, my car also came with stock front components. 99BonnevilleSE you might be able to get some door panels of a similar bonne and have factory space for components.
I love my kappas and plan on sticking with them. One thing I am going to do is get 2 sets of Kappa Perfect 6.5" components, mount them in the front and rear. I love my 6x9'* for bass, but the rear mounted, forward facing stock tweeters sounded awesome.
Currently, I am in the process of getting the garage rash removed from my bumpers. White scuff marks just don't look nice on red cars.
The body shop I use is also known across the state of Michigan for their fiberglass abilities. I'm thinking of some custom ground effects. I really want to replace the side moulding with something that has less moulding.
If you look at the photoshop rendering of what I want my car to look like in my sig, you'll see what I mean. I also want some fender flares to accompany my wider rims when I get them. We'll see, its all up in the air right now.Lee
_________________
<font size=-1>[ This Message was edited by: skza on 2002-03-07 20:20 ]</font>
Junior Member
Posts like a V-Tak
Joined: May 2002
Posts: 29
Likes: 0
From: Brookfield, WI
1993 Pontiac Bonneville SE w/ SLE option package.
Hunter Green w/ Gray Leather Buckets.
Machine Grey Honey comb alloy wheels (BFGoodrich Touring T/A 225/60-HR16(best tires I have ever bought)
Mods
Replaced Fogs (slid on ice and hit a bank of snow - 1 broke. $60 for one was not worth it)
Put a pair of high intensity driving lights behind the grille.
Installed Pioneer Double DIN Stereo.
Also run a set of snow tires (Bridgestone Blizzacks) on steel wheels (w/no hubcaps) in winter.
Hunter Green w/ Gray Leather Buckets.
Machine Grey Honey comb alloy wheels (BFGoodrich Touring T/A 225/60-HR16(best tires I have ever bought)
Mods
Replaced Fogs (slid on ice and hit a bank of snow - 1 broke. $60 for one was not worth it)
Put a pair of high intensity driving lights behind the grille.
Installed Pioneer Double DIN Stereo.
Also run a set of snow tires (Bridgestone Blizzacks) on steel wheels (w/no hubcaps) in winter.
