Cluster swap? 1993 Park Avenue
Thread Starter
Senior Member
True Car Nut
Joined: Jun 2003
Posts: 7,270
Likes: 464
From: Las Cruces, NM
Cluster swap? 1993 Park Avenue
Mods, please push this where you want it, 
Was wanting to switch the cluster from the standard <speedo, fuel gauge> to the full cluster <tach, voltage, oil pressure, etc>. is this a plug and play procedure, or is extra wiring required?
Was wanting to switch the cluster from the standard <speedo, fuel gauge> to the full cluster <tach, voltage, oil pressure, etc>. is this a plug and play procedure, or is extra wiring required?
(very involved). Can't offer you much more than that, ex-fordboy.
Senior Member
Certified GM nut
Joined: Oct 2006
Posts: 2,028
Likes: 1
From: burb of detroit. 2 miles north of 8 mile Rd.
well, speaking from the experiance of adding wires for a bcs and egr to my 92. i thouhght i was going to have to mod the harness and add pins. but there was infact wires from unused ports on the pcm to the firewall. i dont know if the cluster would be the same story. but, theres one way to find out. you could be a guinnea pig.
Thread
Thread Starter
Forum
Replies
Last Post
OLBlueEyesBonne
Performance, Brainstorming & Tuning
0
Mar 26, 2003 09:43 PM