trouble with first gen m62
#1
trouble with first gen m62
I got my m62 1st gen off the car and apart, now im trying to rebuild everything. How do I get the needle bearings out? and how do I get at the bearings behind the gears? and i am also having trouble getting the shaft seal out. any suggestions?
#2
Senior Member
True Car Nut
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
This link should lead you in the right direction.
Welcome to the Bonneville club
http://www.bonnevilleclub.com/forum/...ers/index.html
Welcome to the Bonneville club
http://www.bonnevilleclub.com/forum/...ers/index.html
#4
Junior Member
Posts like a Ricer Type-R
I guess you didn't bother clicking the link for REPLACING NEEDLE BEARINGS?
http://www.bonnevilleclub.com/forum/.../bearings.html
That part works just fine for me. Some of it doesn't (on purpose), but that part DOES work if you click the link provided. My pics on that page should clearly show there are some special tools required.
http://www.bonnevilleclub.com/forum/.../bearings.html
That part works just fine for me. Some of it doesn't (on purpose), but that part DOES work if you click the link provided. My pics on that page should clearly show there are some special tools required.
#5
thanks for the help. that needle bearing section helped but the rebuilding nosedrives doesn't tell me much. i still need to know how to get the roller bearings out behind the gears and how to get the nosedrive seal out because mine seems to be held in by fm (fu#%ing magic).
Thread
Thread Starter
Forum
Replies
Last Post
OLBlueEyesBonne
Forced Induction
20
10-13-2006 02:55 AM
chadow427
Performance, Brainstorming & Tuning
5
09-08-2005 12:30 AM