Rough at idol and boost is -35

Reply Subscribe

Thread Tools

Search this Thread

Jul 13, 2003 | 12:15 AM

#11

dragnfire

Thread Starter

Member

Posts like a V-Tak

Joined: Jul 2003

Posts: 32

Likes: 0

From: Montreal, PQ

PCM service code

excuse my ignorance, but how do I get that?? (I don't have a tester)

Jul 13, 2003 | 12:30 AM

#12

fuddyduddy121

Senior Member

True Car Nut

Joined: Sep 2002

Posts: 3,392

Likes: 3

fuddyduddy121 is on a distinguished road

Do you have Autozones in Canada? They will do it for free. If not there, then you will have to see someone with a scanner, like a mechanic or the dealer.

Jul 13, 2003 | 12:35 AM

#13

dragnfire

Thread Starter

Member

Posts like a V-Tak

Joined: Jul 2003

Posts: 32

Likes: 0

From: Montreal, PQ

autozones

Not here, guess I"ll have too bring it into a garage :(

Jul 13, 2003 | 01:30 AM

#14

willwren

Junior Member

Posts like a Ricer Type-R

Joined: Aug 2002

Posts: 11

Likes: 13

Quote:

Originally Posted by jeffrey10x2

my bad. lol sounds like a vac leak or still a faulty wastegate or wastegate actuator

That'* right where SSEi95 and I were with him on IRC. I'm also betting he'* throwing at least a QDM code.

That what your'e thinking, Fuddy?
Where'* acgssei?

Jul 13, 2003 | 03:33 AM

#15

1992 trofeo

Senior Member

Certified GM nut

Joined: Jul 2003

Posts: 1,963

Likes: 0

From: Ab,ca

hmm?

someone has a service manual for thos bonnies out there somewhere, If it has a digital message center if not cluster you should be able to get at trouble codes with pushing OFF and WARM for 3 seconds. (or atleast both of my toronados do)
so far ive only told yu guys about my wife 92 but I have a 87, runs ok. but Im thinking bout gettin rid of it.

Jul 13, 2003 | 08:54 AM

#16

Guest

Guest

Posts: n/a

if it has the OBD I connector, use a paper clip and jump the diag. terminals and watch the SES light. it will flash starting with a code 12 three times, then each stored code three times then ending with a code 55 three times. if you do this and retrieve the codes, we can help you with your car and it will cost you just a paper clip for the diag.

Jul 13, 2003 | 10:45 AM

#17

SSEi95

Junior Member

Joined: May 2002

Posts: 1

Likes: 0

Quote:

Originally Posted by jeffrey10x2

The last year you could do that was 93. Anything newer requires a scan tool.

Jul 13, 2003 | 11:10 AM

#18

Guest

Guest

Posts: n/a

i am sure that 95 was the starting point of the obd II connector

Jul 13, 2003 | 11:36 AM

#19

willwren

Junior Member

Posts like a Ricer Type-R

Joined: Aug 2002

Posts: 11

Likes: 13

Some, even MOST of the 94'* have 16 pin connectors. The 94'* that have the 12 pin have no flash feature built into the PCM. Only 93 and below. Most auto parts stores will read your codes for you (free) in hopes that you buy parts from them, and you can use an OBD1 scantool on a 94/95, but you have to have the OBD2 cable. My OBD1 scantool will work for them, but I don't have the cable. Jr has the same tool, but has to have both cables to use it on both cars.

It'* really freaky.