Trouble codes 56 and 63 !!!!
Thread Starter
Senior Member
Posts like a Northstar
Joined: Feb 2003
Posts: 530
Likes: 0
From: Mount Vernon, Ohio

Originally Posted by fuddyduddy121
Then code 56 is your boost control solenoid.
http://www.bonnevilleclub.com/forum/...pic.php?t=2066
http://www.bonnevilleclub.com/forum/...pic.php?t=4074
http://www.bonnevilleclub.com/forum/...pic.php?t=2066
http://www.bonnevilleclub.com/forum/...pic.php?t=4074
Any other ideas??? on the Quad prob...I am still getting intermittent SES...with code 36 and 56...
Do you feel it could be PCM?? Just how can you test PCM??
Thanks BUDDY DUDDY....
You're getting Code 36 now, or is that just transposed?
Code 56 is the quad driver, it'* connected to the transmission, boost control solenoid, and EGR solenoid. The PCM is receiving an improper voltage from one of those three devices.
Code 56 is the quad driver, it'* connected to the transmission, boost control solenoid, and EGR solenoid. The PCM is receiving an improper voltage from one of those three devices.
Thread Starter
Senior Member
Posts like a Northstar
Joined: Feb 2003
Posts: 530
Likes: 0
From: Mount Vernon, Ohio

Originally Posted by fuddyduddy121
You're getting Code 36 now, or is that just transposed?
Code 56 is the quad driver, it'* connected to the transmission, boost control solenoid, and EGR solenoid. The PCM is receiving an improper voltage from one of those three devices.
Code 56 is the quad driver, it'* connected to the transmission, boost control solenoid, and EGR solenoid. The PCM is receiving an improper voltage from one of those three devices.
Thanks Again..
Thread Starter
Senior Member
Posts like a Northstar
Joined: Feb 2003
Posts: 530
Likes: 0
From: Mount Vernon, Ohio

Originally Posted by fuddyduddy121
You're getting Code 36 now, or is that just transposed?
Code 56 is the quad driver, it'* connected to the transmission, boost control solenoid, and EGR solenoid. The PCM is receiving an improper voltage from one of those three devices.
Code 56 is the quad driver, it'* connected to the transmission, boost control solenoid, and EGR solenoid. The PCM is receiving an improper voltage from one of those three devices.
I am going ahead with the install of the new EGR and Boost solenoid since they have already stung my wallet...I post my results..
Thanks for the assistance...
Thread
Thread Starter
Forum
Replies
Last Post
bonnevillemac
Performance, Brainstorming & Tuning
3
Mar 11, 2005 11:10 AM



