Okay so I got this problem I have a 2000 bonneville and my power windows or locks don't work on any door, but when I first got the car the driver side window did work but eventually stopped after about a month. The power windows don't work on any door now and the power locks don't work on any door except the driver which when you do it only unlocks and locks the driver door but no others. Also the passenger side power mirror doesn't work but the driver side does. So I'm kinda baffled because I don't see all the motors in all the windows and majority of the locks going out but who knows. I checked the fuses and there fine so anyone got any other advice for trouble shooting or maybe the same problem?

O and when i use the remote unlock it only locks and unlocks the drivers door also.

Please only post your question one time. Check your drivers door module. That controls all the other doors.

Yea I did some more research about DDM and it matches my exact problems and I checked and found alot of water under the carpet and the DDM under the seat was corroided so anyone have any reasons why water would be under there or solutions and links or anything on how to change the DDM with taking seat off and what not? thanks for the replies

Sawgunner is the guy to ask about that. As for leaks, check the sunroof drains, weather stripping around the doors, and look for any rust holes in the floor boards. A search for water leaks should pull up more then enough information.

The DDM is in the drivers door. you have to take the door panel off to access it.

OK well do you think the water leaks have something to do with the DDM going out? Also does anyone have any idea where one could be located to buy... Or any ideas on how to do leak test? Sorry I'm new to all this lol thanks for the help.

hello i would suggest that you take your drivers seat out directly under it in the plastic sleave you find two brown whith white stripe wires follow those till you get to where they are wraped with duck tape remove duck tape where you probely find they are all corroded where they are bridged together cut the bridge out splice together and you should be back in business had same problem water was the issue please let us know if that works

Alright thanks sound good I'll try that next weekend probably and let ya know what I find. Still taking replies if anyone has any different suggestions.