Calling all SSE owners!
08-20-2004, 10:50 AM
#11
Senior Member
Posts like a Turbo
Join Date: Mar 2002
Location: Philly
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
OK. Let'* set a few things straight. I have the schematics for the car, not the Compass. Meaning the wires going to the DIC and Compass. It is in the factory service manual. If you don't have one of these I suggest you get one. Check this out http://cgi.ebay.com/ebaymotors/ws/eB...category=34232
The mesh stuff is commonally known as solder wick. Check this out
http://www.partsexpress.com/pe/showd...number=341-415
and
http://www.partsexpress.com/pe/showd...number=370-056
No it is not reusable.
The mesh stuff is commonally known as solder wick. Check this out
http://www.partsexpress.com/pe/showd...number=341-415
and
http://www.partsexpress.com/pe/showd...number=370-056
No it is not reusable.
08-20-2004, 10:56 AM
#13
Senior Member
True Car Nut
Thread Starter
Join Date: Apr 2004
Location: Three Oaks, Michigan
Posts: 4,879
Likes: 0
Received 0 Likes
on
0 Posts
*sigh* damn.. I was really excited there.. I have the factory service manual too. I've checked the voltages.. they are all good. that'* why I knew it was something in the I/P when I bought the new one.. everything was fine up to it. Which I guess I was correct.. but now I have to figure out the exact problem, because I am NOT skimping on this.. there is no way.
-justin
-justin
08-20-2004, 11:11 AM
#14
Senior Member
True Car Nut
Thread Starter
Join Date: Apr 2004
Location: Three Oaks, Michigan
Posts: 4,879
Likes: 0
Received 0 Likes
on
0 Posts
okay, i'm heading over to radio shack this afternoon.. I am going to try to put the display from the old one to the new.. if that doesn't work, i'll have the display off on the old one, and will be able to get into some circuitry I haven't been able to access.. so either way it'll be good.. but i'll be sure to practice this method on a POS mobo that has some parts I need! lol
-justin
-justin
08-22-2004, 01:49 PM
#15
Senior Member
Posts like a Turbo
Join Date: Sep 2002
Location: Nj/Pa
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Not sure if this is helpful-but--my compass comes on occasionally--doesn't matter what I'm doing--driving, sitting still, etc--but it does come on. Sometimes it'* for a few seconds or even a few minutes, but it does go back out. my dic hasn't worked in a few yrs! When I 1st got the car it would also occasionally come on--but it hasn/t flashed in a few yrs.
09-28-2004, 06:16 PM
#17
Senior Member
True Car Nut
Thread Starter
Join Date: Apr 2004
Location: Three Oaks, Michigan
Posts: 4,879
Likes: 0
Received 0 Likes
on
0 Posts
Nothing really, however my DIC works everytime 
. Once I resolve my coolant leak [waiting for a new gasket], I will move back to the IP for setting it up with the correct mileage, and some cleaning. While I am there, I will check out one I idea I have, by jumping the wires that don't work on the old Compass, and see what happens. If I find life, I will know what needs to be fixed, if I see smoke, I know I did something wrong . I'm thinking sometime this weekend I will get to working on it. As long as all goes as planned in schoolland, and fatherland.
-justin
. Once I resolve my coolant leak [waiting for a new gasket], I will move back to the IP for setting it up with the correct mileage, and some cleaning. While I am there, I will check out one I idea I have, by jumping the wires that don't work on the old Compass, and see what happens. If I find life, I will know what needs to be fixed, if I see smoke, I know I did something wrong . I'm thinking sometime this weekend I will get to working on it. As long as all goes as planned in schoolland, and fatherland.-justin
Thread
Thread Starter
Forum
Replies
Last Post